FCPX Skin Retouching: A Plugin-Free Guide to Flawless Skin

Full Guide: How to Add a Skin Smoother Effect with Final Cut Pro

Liza Brown

Mar 27, 2024• Proven solutions

It’s quite common for vloggers to try to show the best of their states. However, makeup, weather, and the shooting equipment may disagree. So, how to tackle this problem?

Fortunately, we have the best solutions to fix the skin tone issue by using FCPX’s built-in tools or smooth skin plugins. You will learn how to strategically adjust your footage’s look for stylistic purposes and impress your audience with your video-editing skills. Now, let’s understand what a skin smoother effect is before learning how to add it in FCPX.

• Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?
• Part 2: Where to Find Good Skin Smoother Plugins?
• Part 3: How to adopt Skin Smoothing Plugins into FCPX?
• Part 4: How to Smooth Skin in Filmora?
• Part 5: How to smooth skin in Adobe Pro?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Smoothening the skin in Final Cut Pro is very simple. Simply select the video, choose Video effects to be applied, and adjust the percentages from the Inspector pane. You will get wrinkle-free skin with an astonishing look. While multiple plugins are also available to apply a skin smoother effect, you can use the built-in features of Final Cut Pro to smoothen the skin and decrease the amount of contrast.

Here’s how you can do this:

step1Choose the starting image and edit the clip into the timeline. Press Option and make a connected copy of the clip by dragging it up. The start and end points should match for syncing. In the Effects Browser, drag Blur > Gaussian Blur to apply the blur effect on the upper clip.

step2Open the Inspector pan and select Compositing from its bottom. Switch the Blend Mode to Lighten and adjust the Opacity slider as per your desired glow. Usually, 40 to 45% is ideal.

step3Now, go to the top of the Inspector and turn on the blue checkbox next to Gaussian. Adjust the blurring effect until you achieve your desired level of skin softening. It is highly recommended to blur using the horizontal setting to soften the skin while keeping the eyes sharp. Here, the glow is controlled by Opacity while skin softening is controlled by the Blue Amount.

For better results, add a Vignette by selecting and combining the two clips into a Compound Clip. From the Effects Browser, select Stylize > Vignette and adjust drag the vignette. Now, customize the compound clip settings in the Inspector pane until you achieve your desired look. Compare the results between two images before and after editing

Part 2: Where to Find Good Skin Smoother Plugins?

Plugins make it easy for beginners and users with limited expertise to add a skin smoother effect in Final Cut Pro X. You can find both free and paid skin smoother plugins for FCPX online. Given below are some popular skin smoothening plugins for Final Cut Pro X.

1. Skin Smoother 2

Skin Smoother 2 is a powerful and easy-to-use plugin that allows you to smooth out unwanted skin details and enhance your facial appearance.

Price: $19.99 (One-time Charges)

Software Requirements: FCP 10.2 or later

Features:

• Enhanced control over facial adjustments with fine-tuning giving more natural results;
• Precise color sampling without a need to match up with present skin tones; and
• 3 to 5 times faster rendering.

1. Color Finale

Color Finale is a user-friendly, fine-tuned, and fully-featured professional skin smoother plugin purpose bit for FCP.

Price: $152

Software Requirements: FCP 10.4.8 - 10.5.1

Features:

• Color wheels, curves, and LUT utilities;
• A complete professional color toolset for videographers, colorists, and editors; and
• Allows personal preference on the interface.

1. Universe

A comprehensive FCP tool with 89 individual plugins to apply the next-generation skin smoothening and facial improvement effects.

Price: $199/year

Software Requirements: FCPX 10.5 or later

Features:

• Advanced transitions and effects and motion graphics tools;
• A variety of cool presents and text generators; and
• Number counters, chromatic aberration, VHS looks, camera shake, glitch effects.

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Follow these steps to use the Skin Smooth 2 Plugin for Final Cut Pro X:

1. Purchase and download the Skin Smoother 2 plugin. Go to downloads, unzip the folder containing the plugin and install it on your computer.
2. Open the FCPX, go to Effects, and click on Skin Smoother 2. A list of options will appear. Import the image or video you want to edit.
3. To apply the skin-smoothing effect, click on Add Color Mask, and select the areas of the face where the color mask has to be added.
4. Adjust the Skin Smoothing, Smoothing Mix, and the Softness of the color mask as per your requirements.
5. Finally, click on Add Shape Mask, two circles will appear on the image. Adjust the covering area of both circles for Shape Mask 1 to add a smiling face.

Part 4: How to Smooth Skin in Filmora?

Wondershare Filmora features advanced tuning tools and a variety of video filters and overlays. Learn how to smooth skin or beautify your face in the video with this advanced video-editing software.

1. Open Filmora, open New Project and click Import to load your videos to the timeline.
2. Double click on the video to open the editing window. Open the Color panel and adjust parameters according to your preference such as white balance, tone, and 3D LUT, etc.
3. Open the toolbar, click the Advanced Color Tuning icon, go to the advanced color tuning window, and adjust the white balance, color tint and temperature, HSL, 3D LUT, Vignette, and Light. If you are a beginner, try applying the present templates.
4. To set a specific tone or beautify your video, open the Tools tab and click the Color Correction option to change the color tones.
5. Open Effects and Transitions and select the skin smooth filter. Hover the cursor over the filter and click the plus icon in the middle to add that effect. You can also apply the effect to the whole clip by dragging and dropping it directly onto the video clip.

Part 5: How to smooth skin in Adobe Pro?

Given below are simple steps to create a face matter, control the skin smoothing, adjust color correction, and correct the skin glow in Adobe Pro by using the Beauty Studio Effect:

1. Applying the Beauty Studio effect smoothens all parts of the image including the background. However, it will make your footage look artificial, which is not desired. Hence, turn on the Pixel Chooser, pick two colors with the eye dropper tool. Color A for the darker area and Color B for the lighter area.
2. Underneath the Mocha Matte, use the eyedropper tool to select colors on the skin of the subject in your footage.
3. Now, click on View Matte/Mask to visualize the image areas where you are applying the skin smoothing effect. The Beauty Studio will affect the smoothing effect in the white area while the black area will remain unsmoothed.
4. Adjust the Saturation, Hue, and Luma softness to enhance the appearance of the skin, eyes, and mouth.
5. To prevent the rest of the image from getting affected, create a Mocha mask around the face by clicking on the Mocha logo and drawing a mask with the X-Spline tool. Make sure the mask moves as the subject is moved after your track forward and back.
6. Beauty Studio offers four levels of skin smoothing. You can adjust these levels as per your situation by lowering the smoothing amount for each level. For better results, adjust the levels at 70 or below.
7. For the final touch, adjust the sharpening between 10-20 points, add saturation between 3 to 8 points for color correction, and add 5 to 10 points of glow. Your image is ready, compare the results before and after applying the effect.

Conclusion

Smooth skin with clear facial expressions attracts everyone. You can apply a skin smooth effect in your video by using advanced video editing tools like Final Cut Pro, Adobe Premium, and Wondershare Filmora.

There are two methods to add a skin smooth effect with FCPX: By using in-built software settings, or by using plugins like Skin Smoother 2, Color Finale, and Universe. Use Beauty Studio Effect in Adobe Pro to smooth skin and improve facial appearance. Finally, you can beautify the face in your video by adding transitions, making color adjustments, and applying different effects with Wondershare Filmora.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

It’s quite common for vloggers to try to show the best of their states. However, makeup, weather, and the shooting equipment may disagree. So, how to tackle this problem?

Fortunately, we have the best solutions to fix the skin tone issue by using FCPX’s built-in tools or smooth skin plugins. You will learn how to strategically adjust your footage’s look for stylistic purposes and impress your audience with your video-editing skills. Now, let’s understand what a skin smoother effect is before learning how to add it in FCPX.

• Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?
• Part 2: Where to Find Good Skin Smoother Plugins?
• Part 3: How to adopt Skin Smoothing Plugins into FCPX?
• Part 4: How to Smooth Skin in Filmora?
• Part 5: How to smooth skin in Adobe Pro?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Smoothening the skin in Final Cut Pro is very simple. Simply select the video, choose Video effects to be applied, and adjust the percentages from the Inspector pane. You will get wrinkle-free skin with an astonishing look. While multiple plugins are also available to apply a skin smoother effect, you can use the built-in features of Final Cut Pro to smoothen the skin and decrease the amount of contrast.

Here’s how you can do this:

step1Choose the starting image and edit the clip into the timeline. Press Option and make a connected copy of the clip by dragging it up. The start and end points should match for syncing. In the Effects Browser, drag Blur > Gaussian Blur to apply the blur effect on the upper clip.

step2Open the Inspector pan and select Compositing from its bottom. Switch the Blend Mode to Lighten and adjust the Opacity slider as per your desired glow. Usually, 40 to 45% is ideal.

step3Now, go to the top of the Inspector and turn on the blue checkbox next to Gaussian. Adjust the blurring effect until you achieve your desired level of skin softening. It is highly recommended to blur using the horizontal setting to soften the skin while keeping the eyes sharp. Here, the glow is controlled by Opacity while skin softening is controlled by the Blue Amount.

For better results, add a Vignette by selecting and combining the two clips into a Compound Clip. From the Effects Browser, select Stylize > Vignette and adjust drag the vignette. Now, customize the compound clip settings in the Inspector pane until you achieve your desired look. Compare the results between two images before and after editing

Part 2: Where to Find Good Skin Smoother Plugins?

Plugins make it easy for beginners and users with limited expertise to add a skin smoother effect in Final Cut Pro X. You can find both free and paid skin smoother plugins for FCPX online. Given below are some popular skin smoothening plugins for Final Cut Pro X.

1. Skin Smoother 2

Skin Smoother 2 is a powerful and easy-to-use plugin that allows you to smooth out unwanted skin details and enhance your facial appearance.

Price: $19.99 (One-time Charges)

Software Requirements: FCP 10.2 or later

Features:

• Enhanced control over facial adjustments with fine-tuning giving more natural results;
• Precise color sampling without a need to match up with present skin tones; and
• 3 to 5 times faster rendering.

1. Color Finale

Color Finale is a user-friendly, fine-tuned, and fully-featured professional skin smoother plugin purpose bit for FCP.

Price: $152

Software Requirements: FCP 10.4.8 - 10.5.1

Features:

• Color wheels, curves, and LUT utilities;
• A complete professional color toolset for videographers, colorists, and editors; and
• Allows personal preference on the interface.

1. Universe

A comprehensive FCP tool with 89 individual plugins to apply the next-generation skin smoothening and facial improvement effects.

Price: $199/year

Software Requirements: FCPX 10.5 or later

Features:

• Advanced transitions and effects and motion graphics tools;
• A variety of cool presents and text generators; and
• Number counters, chromatic aberration, VHS looks, camera shake, glitch effects.

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Follow these steps to use the Skin Smooth 2 Plugin for Final Cut Pro X:

1. Purchase and download the Skin Smoother 2 plugin. Go to downloads, unzip the folder containing the plugin and install it on your computer.
2. Open the FCPX, go to Effects, and click on Skin Smoother 2. A list of options will appear. Import the image or video you want to edit.
3. To apply the skin-smoothing effect, click on Add Color Mask, and select the areas of the face where the color mask has to be added.
4. Adjust the Skin Smoothing, Smoothing Mix, and the Softness of the color mask as per your requirements.
5. Finally, click on Add Shape Mask, two circles will appear on the image. Adjust the covering area of both circles for Shape Mask 1 to add a smiling face.

Part 4: How to Smooth Skin in Filmora?

Wondershare Filmora features advanced tuning tools and a variety of video filters and overlays. Learn how to smooth skin or beautify your face in the video with this advanced video-editing software.

1. Open Filmora, open New Project and click Import to load your videos to the timeline.
2. Double click on the video to open the editing window. Open the Color panel and adjust parameters according to your preference such as white balance, tone, and 3D LUT, etc.
3. Open the toolbar, click the Advanced Color Tuning icon, go to the advanced color tuning window, and adjust the white balance, color tint and temperature, HSL, 3D LUT, Vignette, and Light. If you are a beginner, try applying the present templates.
4. To set a specific tone or beautify your video, open the Tools tab and click the Color Correction option to change the color tones.
5. Open Effects and Transitions and select the skin smooth filter. Hover the cursor over the filter and click the plus icon in the middle to add that effect. You can also apply the effect to the whole clip by dragging and dropping it directly onto the video clip.

Part 5: How to smooth skin in Adobe Pro?

Given below are simple steps to create a face matter, control the skin smoothing, adjust color correction, and correct the skin glow in Adobe Pro by using the Beauty Studio Effect:

1. Applying the Beauty Studio effect smoothens all parts of the image including the background. However, it will make your footage look artificial, which is not desired. Hence, turn on the Pixel Chooser, pick two colors with the eye dropper tool. Color A for the darker area and Color B for the lighter area.
2. Underneath the Mocha Matte, use the eyedropper tool to select colors on the skin of the subject in your footage.
3. Now, click on View Matte/Mask to visualize the image areas where you are applying the skin smoothing effect. The Beauty Studio will affect the smoothing effect in the white area while the black area will remain unsmoothed.
4. Adjust the Saturation, Hue, and Luma softness to enhance the appearance of the skin, eyes, and mouth.
5. To prevent the rest of the image from getting affected, create a Mocha mask around the face by clicking on the Mocha logo and drawing a mask with the X-Spline tool. Make sure the mask moves as the subject is moved after your track forward and back.
6. Beauty Studio offers four levels of skin smoothing. You can adjust these levels as per your situation by lowering the smoothing amount for each level. For better results, adjust the levels at 70 or below.
7. For the final touch, adjust the sharpening between 10-20 points, add saturation between 3 to 8 points for color correction, and add 5 to 10 points of glow. Your image is ready, compare the results before and after applying the effect.

Conclusion

Smooth skin with clear facial expressions attracts everyone. You can apply a skin smooth effect in your video by using advanced video editing tools like Final Cut Pro, Adobe Premium, and Wondershare Filmora.

There are two methods to add a skin smooth effect with FCPX: By using in-built software settings, or by using plugins like Skin Smoother 2, Color Finale, and Universe. Use Beauty Studio Effect in Adobe Pro to smooth skin and improve facial appearance. Finally, you can beautify the face in your video by adding transitions, making color adjustments, and applying different effects with Wondershare Filmora.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

It’s quite common for vloggers to try to show the best of their states. However, makeup, weather, and the shooting equipment may disagree. So, how to tackle this problem?

Fortunately, we have the best solutions to fix the skin tone issue by using FCPX’s built-in tools or smooth skin plugins. You will learn how to strategically adjust your footage’s look for stylistic purposes and impress your audience with your video-editing skills. Now, let’s understand what a skin smoother effect is before learning how to add it in FCPX.

• Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?
• Part 2: Where to Find Good Skin Smoother Plugins?
• Part 3: How to adopt Skin Smoothing Plugins into FCPX?
• Part 4: How to Smooth Skin in Filmora?
• Part 5: How to smooth skin in Adobe Pro?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Smoothening the skin in Final Cut Pro is very simple. Simply select the video, choose Video effects to be applied, and adjust the percentages from the Inspector pane. You will get wrinkle-free skin with an astonishing look. While multiple plugins are also available to apply a skin smoother effect, you can use the built-in features of Final Cut Pro to smoothen the skin and decrease the amount of contrast.

Here’s how you can do this:

step1Choose the starting image and edit the clip into the timeline. Press Option and make a connected copy of the clip by dragging it up. The start and end points should match for syncing. In the Effects Browser, drag Blur > Gaussian Blur to apply the blur effect on the upper clip.

step2Open the Inspector pan and select Compositing from its bottom. Switch the Blend Mode to Lighten and adjust the Opacity slider as per your desired glow. Usually, 40 to 45% is ideal.

step3Now, go to the top of the Inspector and turn on the blue checkbox next to Gaussian. Adjust the blurring effect until you achieve your desired level of skin softening. It is highly recommended to blur using the horizontal setting to soften the skin while keeping the eyes sharp. Here, the glow is controlled by Opacity while skin softening is controlled by the Blue Amount.

For better results, add a Vignette by selecting and combining the two clips into a Compound Clip. From the Effects Browser, select Stylize > Vignette and adjust drag the vignette. Now, customize the compound clip settings in the Inspector pane until you achieve your desired look. Compare the results between two images before and after editing

Part 2: Where to Find Good Skin Smoother Plugins?

Plugins make it easy for beginners and users with limited expertise to add a skin smoother effect in Final Cut Pro X. You can find both free and paid skin smoother plugins for FCPX online. Given below are some popular skin smoothening plugins for Final Cut Pro X.

1. Skin Smoother 2

Skin Smoother 2 is a powerful and easy-to-use plugin that allows you to smooth out unwanted skin details and enhance your facial appearance.

Price: $19.99 (One-time Charges)

Software Requirements: FCP 10.2 or later

Features:

• Enhanced control over facial adjustments with fine-tuning giving more natural results;
• Precise color sampling without a need to match up with present skin tones; and
• 3 to 5 times faster rendering.

1. Color Finale

Color Finale is a user-friendly, fine-tuned, and fully-featured professional skin smoother plugin purpose bit for FCP.

Price: $152

Software Requirements: FCP 10.4.8 - 10.5.1

Features:

• Color wheels, curves, and LUT utilities;
• A complete professional color toolset for videographers, colorists, and editors; and
• Allows personal preference on the interface.

1. Universe

A comprehensive FCP tool with 89 individual plugins to apply the next-generation skin smoothening and facial improvement effects.

Price: $199/year

Software Requirements: FCPX 10.5 or later

Features:

• Advanced transitions and effects and motion graphics tools;
• A variety of cool presents and text generators; and
• Number counters, chromatic aberration, VHS looks, camera shake, glitch effects.

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Follow these steps to use the Skin Smooth 2 Plugin for Final Cut Pro X:

1. Purchase and download the Skin Smoother 2 plugin. Go to downloads, unzip the folder containing the plugin and install it on your computer.
2. Open the FCPX, go to Effects, and click on Skin Smoother 2. A list of options will appear. Import the image or video you want to edit.
3. To apply the skin-smoothing effect, click on Add Color Mask, and select the areas of the face where the color mask has to be added.
4. Adjust the Skin Smoothing, Smoothing Mix, and the Softness of the color mask as per your requirements.
5. Finally, click on Add Shape Mask, two circles will appear on the image. Adjust the covering area of both circles for Shape Mask 1 to add a smiling face.

Part 4: How to Smooth Skin in Filmora?

Wondershare Filmora features advanced tuning tools and a variety of video filters and overlays. Learn how to smooth skin or beautify your face in the video with this advanced video-editing software.

1. Open Filmora, open New Project and click Import to load your videos to the timeline.
2. Double click on the video to open the editing window. Open the Color panel and adjust parameters according to your preference such as white balance, tone, and 3D LUT, etc.
3. Open the toolbar, click the Advanced Color Tuning icon, go to the advanced color tuning window, and adjust the white balance, color tint and temperature, HSL, 3D LUT, Vignette, and Light. If you are a beginner, try applying the present templates.
4. To set a specific tone or beautify your video, open the Tools tab and click the Color Correction option to change the color tones.
5. Open Effects and Transitions and select the skin smooth filter. Hover the cursor over the filter and click the plus icon in the middle to add that effect. You can also apply the effect to the whole clip by dragging and dropping it directly onto the video clip.

Part 5: How to smooth skin in Adobe Pro?

Given below are simple steps to create a face matter, control the skin smoothing, adjust color correction, and correct the skin glow in Adobe Pro by using the Beauty Studio Effect:

1. Applying the Beauty Studio effect smoothens all parts of the image including the background. However, it will make your footage look artificial, which is not desired. Hence, turn on the Pixel Chooser, pick two colors with the eye dropper tool. Color A for the darker area and Color B for the lighter area.
2. Underneath the Mocha Matte, use the eyedropper tool to select colors on the skin of the subject in your footage.
3. Now, click on View Matte/Mask to visualize the image areas where you are applying the skin smoothing effect. The Beauty Studio will affect the smoothing effect in the white area while the black area will remain unsmoothed.
4. Adjust the Saturation, Hue, and Luma softness to enhance the appearance of the skin, eyes, and mouth.
5. To prevent the rest of the image from getting affected, create a Mocha mask around the face by clicking on the Mocha logo and drawing a mask with the X-Spline tool. Make sure the mask moves as the subject is moved after your track forward and back.
6. Beauty Studio offers four levels of skin smoothing. You can adjust these levels as per your situation by lowering the smoothing amount for each level. For better results, adjust the levels at 70 or below.
7. For the final touch, adjust the sharpening between 10-20 points, add saturation between 3 to 8 points for color correction, and add 5 to 10 points of glow. Your image is ready, compare the results before and after applying the effect.

Conclusion

Smooth skin with clear facial expressions attracts everyone. You can apply a skin smooth effect in your video by using advanced video editing tools like Final Cut Pro, Adobe Premium, and Wondershare Filmora.

There are two methods to add a skin smooth effect with FCPX: By using in-built software settings, or by using plugins like Skin Smoother 2, Color Finale, and Universe. Use Beauty Studio Effect in Adobe Pro to smooth skin and improve facial appearance. Finally, you can beautify the face in your video by adding transitions, making color adjustments, and applying different effects with Wondershare Filmora.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

It’s quite common for vloggers to try to show the best of their states. However, makeup, weather, and the shooting equipment may disagree. So, how to tackle this problem?

Fortunately, we have the best solutions to fix the skin tone issue by using FCPX’s built-in tools or smooth skin plugins. You will learn how to strategically adjust your footage’s look for stylistic purposes and impress your audience with your video-editing skills. Now, let’s understand what a skin smoother effect is before learning how to add it in FCPX.

• Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?
• Part 2: Where to Find Good Skin Smoother Plugins?
• Part 3: How to adopt Skin Smoothing Plugins into FCPX?
• Part 4: How to Smooth Skin in Filmora?
• Part 5: How to smooth skin in Adobe Pro?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Smoothening the skin in Final Cut Pro is very simple. Simply select the video, choose Video effects to be applied, and adjust the percentages from the Inspector pane. You will get wrinkle-free skin with an astonishing look. While multiple plugins are also available to apply a skin smoother effect, you can use the built-in features of Final Cut Pro to smoothen the skin and decrease the amount of contrast.

Here’s how you can do this:

step1Choose the starting image and edit the clip into the timeline. Press Option and make a connected copy of the clip by dragging it up. The start and end points should match for syncing. In the Effects Browser, drag Blur > Gaussian Blur to apply the blur effect on the upper clip.

step2Open the Inspector pan and select Compositing from its bottom. Switch the Blend Mode to Lighten and adjust the Opacity slider as per your desired glow. Usually, 40 to 45% is ideal.

step3Now, go to the top of the Inspector and turn on the blue checkbox next to Gaussian. Adjust the blurring effect until you achieve your desired level of skin softening. It is highly recommended to blur using the horizontal setting to soften the skin while keeping the eyes sharp. Here, the glow is controlled by Opacity while skin softening is controlled by the Blue Amount.

For better results, add a Vignette by selecting and combining the two clips into a Compound Clip. From the Effects Browser, select Stylize > Vignette and adjust drag the vignette. Now, customize the compound clip settings in the Inspector pane until you achieve your desired look. Compare the results between two images before and after editing

Part 2: Where to Find Good Skin Smoother Plugins?

Plugins make it easy for beginners and users with limited expertise to add a skin smoother effect in Final Cut Pro X. You can find both free and paid skin smoother plugins for FCPX online. Given below are some popular skin smoothening plugins for Final Cut Pro X.

1. Skin Smoother 2

Skin Smoother 2 is a powerful and easy-to-use plugin that allows you to smooth out unwanted skin details and enhance your facial appearance.

Price: $19.99 (One-time Charges)

Software Requirements: FCP 10.2 or later

Features:

• Enhanced control over facial adjustments with fine-tuning giving more natural results;
• Precise color sampling without a need to match up with present skin tones; and
• 3 to 5 times faster rendering.

1. Color Finale

Color Finale is a user-friendly, fine-tuned, and fully-featured professional skin smoother plugin purpose bit for FCP.

Price: $152

Software Requirements: FCP 10.4.8 - 10.5.1

Features:

• Color wheels, curves, and LUT utilities;
• A complete professional color toolset for videographers, colorists, and editors; and
• Allows personal preference on the interface.

1. Universe

A comprehensive FCP tool with 89 individual plugins to apply the next-generation skin smoothening and facial improvement effects.

Price: $199/year

Software Requirements: FCPX 10.5 or later

Features:

• Advanced transitions and effects and motion graphics tools;
• A variety of cool presents and text generators; and
• Number counters, chromatic aberration, VHS looks, camera shake, glitch effects.

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Follow these steps to use the Skin Smooth 2 Plugin for Final Cut Pro X:

1. Purchase and download the Skin Smoother 2 plugin. Go to downloads, unzip the folder containing the plugin and install it on your computer.
2. Open the FCPX, go to Effects, and click on Skin Smoother 2. A list of options will appear. Import the image or video you want to edit.
3. To apply the skin-smoothing effect, click on Add Color Mask, and select the areas of the face where the color mask has to be added.
4. Adjust the Skin Smoothing, Smoothing Mix, and the Softness of the color mask as per your requirements.
5. Finally, click on Add Shape Mask, two circles will appear on the image. Adjust the covering area of both circles for Shape Mask 1 to add a smiling face.

Part 4: How to Smooth Skin in Filmora?

Wondershare Filmora features advanced tuning tools and a variety of video filters and overlays. Learn how to smooth skin or beautify your face in the video with this advanced video-editing software.

1. Open Filmora, open New Project and click Import to load your videos to the timeline.
2. Double click on the video to open the editing window. Open the Color panel and adjust parameters according to your preference such as white balance, tone, and 3D LUT, etc.
3. Open the toolbar, click the Advanced Color Tuning icon, go to the advanced color tuning window, and adjust the white balance, color tint and temperature, HSL, 3D LUT, Vignette, and Light. If you are a beginner, try applying the present templates.
4. To set a specific tone or beautify your video, open the Tools tab and click the Color Correction option to change the color tones.
5. Open Effects and Transitions and select the skin smooth filter. Hover the cursor over the filter and click the plus icon in the middle to add that effect. You can also apply the effect to the whole clip by dragging and dropping it directly onto the video clip.

Part 5: How to smooth skin in Adobe Pro?

Given below are simple steps to create a face matter, control the skin smoothing, adjust color correction, and correct the skin glow in Adobe Pro by using the Beauty Studio Effect:

1. Applying the Beauty Studio effect smoothens all parts of the image including the background. However, it will make your footage look artificial, which is not desired. Hence, turn on the Pixel Chooser, pick two colors with the eye dropper tool. Color A for the darker area and Color B for the lighter area.
2. Underneath the Mocha Matte, use the eyedropper tool to select colors on the skin of the subject in your footage.
3. Now, click on View Matte/Mask to visualize the image areas where you are applying the skin smoothing effect. The Beauty Studio will affect the smoothing effect in the white area while the black area will remain unsmoothed.
4. Adjust the Saturation, Hue, and Luma softness to enhance the appearance of the skin, eyes, and mouth.
5. To prevent the rest of the image from getting affected, create a Mocha mask around the face by clicking on the Mocha logo and drawing a mask with the X-Spline tool. Make sure the mask moves as the subject is moved after your track forward and back.
6. Beauty Studio offers four levels of skin smoothing. You can adjust these levels as per your situation by lowering the smoothing amount for each level. For better results, adjust the levels at 70 or below.
7. For the final touch, adjust the sharpening between 10-20 points, add saturation between 3 to 8 points for color correction, and add 5 to 10 points of glow. Your image is ready, compare the results before and after applying the effect.

Conclusion

Smooth skin with clear facial expressions attracts everyone. You can apply a skin smooth effect in your video by using advanced video editing tools like Final Cut Pro, Adobe Premium, and Wondershare Filmora.

There are two methods to add a skin smooth effect with FCPX: By using in-built software settings, or by using plugins like Skin Smoother 2, Color Finale, and Universe. Use Beauty Studio Effect in Adobe Pro to smooth skin and improve facial appearance. Finally, you can beautify the face in your video by adding transitions, making color adjustments, and applying different effects with Wondershare Filmora.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Transform Your Video Footage: Shape, Size, and More

How to Change Shape of a Video?

Liza Brown

Mar 27, 2024• Proven solutions

While most videos nowadays are rectangular, and are recorded in either landscape or portrait orientation, there are some social media platforms that require the clips to be square shaped. If you want to upload your footages on such websites, it is essential to learn how to change video shape.

Another benefit of changing the shape of the recorded films is that they can be adjusted in limited amount of space, especially if they are to be posted on a website. Furthermore, some fancy designs such as star-shaped or circle-shaped videos attract more attention when used in digital marketing campaigns.

With that said, here you will learn how to change the shape of a video using one of the most advanced and versatile post-production tools, Wondershare Filmora.

Want to learn more about aspect ratio of your video? Click here!

Or, you just want to transfer your video into vertical.

Part 1: How to Change Video Shape from Rectangle to Square

Depending on the recording device and the target audiences a video is intended to be distributed to, the aspect ratio of the produced footage could be 16:9, 4:3, or 21:9 that makes the film rectangular-shaped. Given that, the aspect ratio can be modified to change the film shape from rectangle to square.

The instructions given below explain how to change video shape from rectangle to square in Wondershare Filmora:

Step 1: Import Video to Timeline

Launch Wondershare Filmora on your PC (a Windows 10 computer is used here), click the Add Files icon from the center of the Media window present at the upper-left section, and use the Open box that appears to select and import the source video to Filmora. Next, drag the video from the Media window to the Timeline, and select your preferred option when/if the Project Setting confirmation box appears.

Step 2: Change Aspect Ratio

Select the video in the Timeline, and click the Crop and Zoom icon from the upper-left area of the Timeline itself. On the Crop and Zoom window that opens next, select 1:1 from the Ratio drop-down list, and click OK to save the new setting.

Step 3: Export the Video

Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box, select your preferred format from the Format list in the left pane, optionally click SETTINGS from the right window to make other adjustments if necessary, and click EXPORT from the bottom-right corner of the box.

For more details, please refer to this article: How to Resize a Video to Right Aspect Ratio and Size.

Part 2: Change Video Shape by Cropping

If your preferred aspect ratio isn’t available in the ‘Ratio’ drop-down list of the ‘Crop and Zoom’ window, Wondershare Filmora allows you to manually change the video to a custom shape.

You can learn how to change the shape of a video to an unlisted aspect ratio by following the instructions given below:

Step 1: Import the Video and Get to the Crop and Zoom Window

Follow the method explained in Step 1 of Part 1 to import a video to Wondershare Filmora, and then add it to the Timeline.

Step 2: Select Custom Ratio

Select the video in the Timeline, and click the Crop and Zoom icon as explained earlier to open its window. Next, select Custom from the Ratio drop-down list to be able to crop the videos unproportionally.

Step 3: Crop the Video Manually

Drag the cropping handles from any one edge of the video. Repeat this process for all the four sides to select the area of interest. Click OK to save the changes.

Step 4: Export the Video

Follow the process explained in Step 3 of Part 1 to export the modified video.

Part 3: Change Video Shape to Circle or Other Shapes in Filmora

Another, rather better way of changing videos to custom shapes is with the help of image or shape masking.

In Filmora you can apply image masks either from the existing presets, i.e. circle, star, diamond, etc., or you can add custom photos if need be. Professionals generally use custom pictures to create fancy logos and titles.

On the other hand, shape masking allows you to mask a background video with a foreground footage in a custom shape.

Although the basic concept of both types of masking is same, the options available under each can be used to produce effective outputs.

That said, following are the instructions to apply both types of masking to your videos:

Image Masking

The steps given below explain how to change video shape with image masking in Filmora:

Step 1: Add Clip to Timeline

Use the method explained in the previous sections to import a clip and add it to the Timeline.

Step 2: Add Image Mask

Click Effects from the standard toolbar at the top, select Utility from the left pane, drag Image Mask from the Utility window, and drop it on top of the video itself in the Timeline. Notice how the fx icon appears on the video layer showing that the effect has been successfully added.

Step 3: Customize Image Mask

On the Timeline, double-click the video layer you applied Image Mask to, and notice all the available shapes available under the Preset Mask section on the Video Effects > Image Mask window that appears at the upper-left area. You can double-click any of the available shape presets to apply it to the video layer. In addition, drag the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size, and edge smoothness respectively. You can also check the Invert Mask box to reverse the masking effect on the video. Finally, click OK to save the changes, and follow the method explained in earlier parts to export the video.

Shape Masking

The following steps explain how to change the shape of a video with shape masks in Filmora:

Step 1: Get to the Utility Window

Add at two footages on their individual layers in the Timeline (make sure to place the second layer above the first one), and follow the method explained above to get to the Effects > Utility window.

Step 2: Add Shape Mask

Drag Shape Mask from the Utility window, and drop it on top of the video itself in the Timeline. Confirm that the fx icon appears on the video layer to ensure that the effect has been applied.

Step 3: Customize Shape Mask

Double-click the video layer in the Timeline you applied shape mask to. On the Video Effects > Shape Mask window, use the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size and edge smoothness respectively. Optionally check the Invert Mask box to reverse the masking effect, and click OK to save the settings. Next, follow the method explained earlier to export the video.

FAQs

1. What’s the difference between Image Mask and Shape Mask in Filmora?

A) In Filmora, Image Mask allows you to use an image (or any available preset) for masking so that the background footage is cropped to the shape of the picture. This is generally used to create logos and dynamic titles for movies or documentaries. On the other hand, Shape Mask enables you to mask the background clip with the foreground footage in the form of a shape that could be positioned and customized using the available sliders.

2. How many image masks are available in Filmora?

A) At the time of this writing, Wondershare Filmora has around 40 image mask presets. In addition, it also allows you to add custom images from your PC for more dynamic approach.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

While most videos nowadays are rectangular, and are recorded in either landscape or portrait orientation, there are some social media platforms that require the clips to be square shaped. If you want to upload your footages on such websites, it is essential to learn how to change video shape.

Another benefit of changing the shape of the recorded films is that they can be adjusted in limited amount of space, especially if they are to be posted on a website. Furthermore, some fancy designs such as star-shaped or circle-shaped videos attract more attention when used in digital marketing campaigns.

With that said, here you will learn how to change the shape of a video using one of the most advanced and versatile post-production tools, Wondershare Filmora.

Want to learn more about aspect ratio of your video? Click here!

Or, you just want to transfer your video into vertical.

Part 1: How to Change Video Shape from Rectangle to Square

Depending on the recording device and the target audiences a video is intended to be distributed to, the aspect ratio of the produced footage could be 16:9, 4:3, or 21:9 that makes the film rectangular-shaped. Given that, the aspect ratio can be modified to change the film shape from rectangle to square.

The instructions given below explain how to change video shape from rectangle to square in Wondershare Filmora:

Step 1: Import Video to Timeline

Launch Wondershare Filmora on your PC (a Windows 10 computer is used here), click the Add Files icon from the center of the Media window present at the upper-left section, and use the Open box that appears to select and import the source video to Filmora. Next, drag the video from the Media window to the Timeline, and select your preferred option when/if the Project Setting confirmation box appears.

Step 2: Change Aspect Ratio

Select the video in the Timeline, and click the Crop and Zoom icon from the upper-left area of the Timeline itself. On the Crop and Zoom window that opens next, select 1:1 from the Ratio drop-down list, and click OK to save the new setting.

Step 3: Export the Video

Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box, select your preferred format from the Format list in the left pane, optionally click SETTINGS from the right window to make other adjustments if necessary, and click EXPORT from the bottom-right corner of the box.

For more details, please refer to this article: How to Resize a Video to Right Aspect Ratio and Size.

Part 2: Change Video Shape by Cropping

If your preferred aspect ratio isn’t available in the ‘Ratio’ drop-down list of the ‘Crop and Zoom’ window, Wondershare Filmora allows you to manually change the video to a custom shape.

You can learn how to change the shape of a video to an unlisted aspect ratio by following the instructions given below:

Step 1: Import the Video and Get to the Crop and Zoom Window

Follow the method explained in Step 1 of Part 1 to import a video to Wondershare Filmora, and then add it to the Timeline.

Step 2: Select Custom Ratio

Select the video in the Timeline, and click the Crop and Zoom icon as explained earlier to open its window. Next, select Custom from the Ratio drop-down list to be able to crop the videos unproportionally.

Step 3: Crop the Video Manually

Drag the cropping handles from any one edge of the video. Repeat this process for all the four sides to select the area of interest. Click OK to save the changes.

Step 4: Export the Video

Follow the process explained in Step 3 of Part 1 to export the modified video.

Part 3: Change Video Shape to Circle or Other Shapes in Filmora

Another, rather better way of changing videos to custom shapes is with the help of image or shape masking.

In Filmora you can apply image masks either from the existing presets, i.e. circle, star, diamond, etc., or you can add custom photos if need be. Professionals generally use custom pictures to create fancy logos and titles.

On the other hand, shape masking allows you to mask a background video with a foreground footage in a custom shape.

Although the basic concept of both types of masking is same, the options available under each can be used to produce effective outputs.

That said, following are the instructions to apply both types of masking to your videos:

Image Masking

The steps given below explain how to change video shape with image masking in Filmora:

Step 1: Add Clip to Timeline

Use the method explained in the previous sections to import a clip and add it to the Timeline.

Step 2: Add Image Mask

Click Effects from the standard toolbar at the top, select Utility from the left pane, drag Image Mask from the Utility window, and drop it on top of the video itself in the Timeline. Notice how the fx icon appears on the video layer showing that the effect has been successfully added.

Step 3: Customize Image Mask

On the Timeline, double-click the video layer you applied Image Mask to, and notice all the available shapes available under the Preset Mask section on the Video Effects > Image Mask window that appears at the upper-left area. You can double-click any of the available shape presets to apply it to the video layer. In addition, drag the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size, and edge smoothness respectively. You can also check the Invert Mask box to reverse the masking effect on the video. Finally, click OK to save the changes, and follow the method explained in earlier parts to export the video.

Shape Masking

The following steps explain how to change the shape of a video with shape masks in Filmora:

Step 1: Get to the Utility Window

Add at two footages on their individual layers in the Timeline (make sure to place the second layer above the first one), and follow the method explained above to get to the Effects > Utility window.

Step 2: Add Shape Mask

Drag Shape Mask from the Utility window, and drop it on top of the video itself in the Timeline. Confirm that the fx icon appears on the video layer to ensure that the effect has been applied.

Step 3: Customize Shape Mask

Double-click the video layer in the Timeline you applied shape mask to. On the Video Effects > Shape Mask window, use the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size and edge smoothness respectively. Optionally check the Invert Mask box to reverse the masking effect, and click OK to save the settings. Next, follow the method explained earlier to export the video.

FAQs

1. What’s the difference between Image Mask and Shape Mask in Filmora?

A) In Filmora, Image Mask allows you to use an image (or any available preset) for masking so that the background footage is cropped to the shape of the picture. This is generally used to create logos and dynamic titles for movies or documentaries. On the other hand, Shape Mask enables you to mask the background clip with the foreground footage in the form of a shape that could be positioned and customized using the available sliders.

2. How many image masks are available in Filmora?

A) At the time of this writing, Wondershare Filmora has around 40 image mask presets. In addition, it also allows you to add custom images from your PC for more dynamic approach.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

While most videos nowadays are rectangular, and are recorded in either landscape or portrait orientation, there are some social media platforms that require the clips to be square shaped. If you want to upload your footages on such websites, it is essential to learn how to change video shape.

Another benefit of changing the shape of the recorded films is that they can be adjusted in limited amount of space, especially if they are to be posted on a website. Furthermore, some fancy designs such as star-shaped or circle-shaped videos attract more attention when used in digital marketing campaigns.

With that said, here you will learn how to change the shape of a video using one of the most advanced and versatile post-production tools, Wondershare Filmora.

Want to learn more about aspect ratio of your video? Click here!

Or, you just want to transfer your video into vertical.

Part 1: How to Change Video Shape from Rectangle to Square

Depending on the recording device and the target audiences a video is intended to be distributed to, the aspect ratio of the produced footage could be 16:9, 4:3, or 21:9 that makes the film rectangular-shaped. Given that, the aspect ratio can be modified to change the film shape from rectangle to square.

The instructions given below explain how to change video shape from rectangle to square in Wondershare Filmora:

Step 1: Import Video to Timeline

Launch Wondershare Filmora on your PC (a Windows 10 computer is used here), click the Add Files icon from the center of the Media window present at the upper-left section, and use the Open box that appears to select and import the source video to Filmora. Next, drag the video from the Media window to the Timeline, and select your preferred option when/if the Project Setting confirmation box appears.

Step 2: Change Aspect Ratio

Select the video in the Timeline, and click the Crop and Zoom icon from the upper-left area of the Timeline itself. On the Crop and Zoom window that opens next, select 1:1 from the Ratio drop-down list, and click OK to save the new setting.

Step 3: Export the Video

Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box, select your preferred format from the Format list in the left pane, optionally click SETTINGS from the right window to make other adjustments if necessary, and click EXPORT from the bottom-right corner of the box.

For more details, please refer to this article: How to Resize a Video to Right Aspect Ratio and Size.

Part 2: Change Video Shape by Cropping

If your preferred aspect ratio isn’t available in the ‘Ratio’ drop-down list of the ‘Crop and Zoom’ window, Wondershare Filmora allows you to manually change the video to a custom shape.

You can learn how to change the shape of a video to an unlisted aspect ratio by following the instructions given below:

Step 1: Import the Video and Get to the Crop and Zoom Window

Follow the method explained in Step 1 of Part 1 to import a video to Wondershare Filmora, and then add it to the Timeline.

Step 2: Select Custom Ratio

Select the video in the Timeline, and click the Crop and Zoom icon as explained earlier to open its window. Next, select Custom from the Ratio drop-down list to be able to crop the videos unproportionally.

Step 3: Crop the Video Manually

Drag the cropping handles from any one edge of the video. Repeat this process for all the four sides to select the area of interest. Click OK to save the changes.

Step 4: Export the Video

Follow the process explained in Step 3 of Part 1 to export the modified video.

Part 3: Change Video Shape to Circle or Other Shapes in Filmora

Another, rather better way of changing videos to custom shapes is with the help of image or shape masking.

In Filmora you can apply image masks either from the existing presets, i.e. circle, star, diamond, etc., or you can add custom photos if need be. Professionals generally use custom pictures to create fancy logos and titles.

On the other hand, shape masking allows you to mask a background video with a foreground footage in a custom shape.

Although the basic concept of both types of masking is same, the options available under each can be used to produce effective outputs.

That said, following are the instructions to apply both types of masking to your videos:

Image Masking

The steps given below explain how to change video shape with image masking in Filmora:

Step 1: Add Clip to Timeline

Use the method explained in the previous sections to import a clip and add it to the Timeline.

Step 2: Add Image Mask

Click Effects from the standard toolbar at the top, select Utility from the left pane, drag Image Mask from the Utility window, and drop it on top of the video itself in the Timeline. Notice how the fx icon appears on the video layer showing that the effect has been successfully added.

Step 3: Customize Image Mask

On the Timeline, double-click the video layer you applied Image Mask to, and notice all the available shapes available under the Preset Mask section on the Video Effects > Image Mask window that appears at the upper-left area. You can double-click any of the available shape presets to apply it to the video layer. In addition, drag the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size, and edge smoothness respectively. You can also check the Invert Mask box to reverse the masking effect on the video. Finally, click OK to save the changes, and follow the method explained in earlier parts to export the video.

Shape Masking

The following steps explain how to change the shape of a video with shape masks in Filmora:

Step 1: Get to the Utility Window

Add at two footages on their individual layers in the Timeline (make sure to place the second layer above the first one), and follow the method explained above to get to the Effects > Utility window.

Step 2: Add Shape Mask

Drag Shape Mask from the Utility window, and drop it on top of the video itself in the Timeline. Confirm that the fx icon appears on the video layer to ensure that the effect has been applied.

Step 3: Customize Shape Mask

Double-click the video layer in the Timeline you applied shape mask to. On the Video Effects > Shape Mask window, use the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size and edge smoothness respectively. Optionally check the Invert Mask box to reverse the masking effect, and click OK to save the settings. Next, follow the method explained earlier to export the video.

FAQs

1. What’s the difference between Image Mask and Shape Mask in Filmora?

A) In Filmora, Image Mask allows you to use an image (or any available preset) for masking so that the background footage is cropped to the shape of the picture. This is generally used to create logos and dynamic titles for movies or documentaries. On the other hand, Shape Mask enables you to mask the background clip with the foreground footage in the form of a shape that could be positioned and customized using the available sliders.

2. How many image masks are available in Filmora?

A) At the time of this writing, Wondershare Filmora has around 40 image mask presets. In addition, it also allows you to add custom images from your PC for more dynamic approach.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

While most videos nowadays are rectangular, and are recorded in either landscape or portrait orientation, there are some social media platforms that require the clips to be square shaped. If you want to upload your footages on such websites, it is essential to learn how to change video shape.

Another benefit of changing the shape of the recorded films is that they can be adjusted in limited amount of space, especially if they are to be posted on a website. Furthermore, some fancy designs such as star-shaped or circle-shaped videos attract more attention when used in digital marketing campaigns.

With that said, here you will learn how to change the shape of a video using one of the most advanced and versatile post-production tools, Wondershare Filmora.

Want to learn more about aspect ratio of your video? Click here!

Or, you just want to transfer your video into vertical.

Part 1: How to Change Video Shape from Rectangle to Square

Depending on the recording device and the target audiences a video is intended to be distributed to, the aspect ratio of the produced footage could be 16:9, 4:3, or 21:9 that makes the film rectangular-shaped. Given that, the aspect ratio can be modified to change the film shape from rectangle to square.

The instructions given below explain how to change video shape from rectangle to square in Wondershare Filmora:

Step 1: Import Video to Timeline

Launch Wondershare Filmora on your PC (a Windows 10 computer is used here), click the Add Files icon from the center of the Media window present at the upper-left section, and use the Open box that appears to select and import the source video to Filmora. Next, drag the video from the Media window to the Timeline, and select your preferred option when/if the Project Setting confirmation box appears.

Step 2: Change Aspect Ratio

Select the video in the Timeline, and click the Crop and Zoom icon from the upper-left area of the Timeline itself. On the Crop and Zoom window that opens next, select 1:1 from the Ratio drop-down list, and click OK to save the new setting.

Step 3: Export the Video

Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box, select your preferred format from the Format list in the left pane, optionally click SETTINGS from the right window to make other adjustments if necessary, and click EXPORT from the bottom-right corner of the box.

For more details, please refer to this article: How to Resize a Video to Right Aspect Ratio and Size.

Part 2: Change Video Shape by Cropping

If your preferred aspect ratio isn’t available in the ‘Ratio’ drop-down list of the ‘Crop and Zoom’ window, Wondershare Filmora allows you to manually change the video to a custom shape.

You can learn how to change the shape of a video to an unlisted aspect ratio by following the instructions given below:

Step 1: Import the Video and Get to the Crop and Zoom Window

Follow the method explained in Step 1 of Part 1 to import a video to Wondershare Filmora, and then add it to the Timeline.

Step 2: Select Custom Ratio

Select the video in the Timeline, and click the Crop and Zoom icon as explained earlier to open its window. Next, select Custom from the Ratio drop-down list to be able to crop the videos unproportionally.

Step 3: Crop the Video Manually

Drag the cropping handles from any one edge of the video. Repeat this process for all the four sides to select the area of interest. Click OK to save the changes.

Step 4: Export the Video

Follow the process explained in Step 3 of Part 1 to export the modified video.

Part 3: Change Video Shape to Circle or Other Shapes in Filmora

Another, rather better way of changing videos to custom shapes is with the help of image or shape masking.

In Filmora you can apply image masks either from the existing presets, i.e. circle, star, diamond, etc., or you can add custom photos if need be. Professionals generally use custom pictures to create fancy logos and titles.

On the other hand, shape masking allows you to mask a background video with a foreground footage in a custom shape.

Although the basic concept of both types of masking is same, the options available under each can be used to produce effective outputs.

That said, following are the instructions to apply both types of masking to your videos:

Image Masking

The steps given below explain how to change video shape with image masking in Filmora:

Step 1: Add Clip to Timeline

Use the method explained in the previous sections to import a clip and add it to the Timeline.

Step 2: Add Image Mask

Click Effects from the standard toolbar at the top, select Utility from the left pane, drag Image Mask from the Utility window, and drop it on top of the video itself in the Timeline. Notice how the fx icon appears on the video layer showing that the effect has been successfully added.

Step 3: Customize Image Mask

On the Timeline, double-click the video layer you applied Image Mask to, and notice all the available shapes available under the Preset Mask section on the Video Effects > Image Mask window that appears at the upper-left area. You can double-click any of the available shape presets to apply it to the video layer. In addition, drag the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size, and edge smoothness respectively. You can also check the Invert Mask box to reverse the masking effect on the video. Finally, click OK to save the changes, and follow the method explained in earlier parts to export the video.

Shape Masking

The following steps explain how to change the shape of a video with shape masks in Filmora:

Step 1: Get to the Utility Window

Add at two footages on their individual layers in the Timeline (make sure to place the second layer above the first one), and follow the method explained above to get to the Effects > Utility window.

Step 2: Add Shape Mask

Drag Shape Mask from the Utility window, and drop it on top of the video itself in the Timeline. Confirm that the fx icon appears on the video layer to ensure that the effect has been applied.

Step 3: Customize Shape Mask

Double-click the video layer in the Timeline you applied shape mask to. On the Video Effects > Shape Mask window, use the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size and edge smoothness respectively. Optionally check the Invert Mask box to reverse the masking effect, and click OK to save the settings. Next, follow the method explained earlier to export the video.

FAQs

1. What’s the difference between Image Mask and Shape Mask in Filmora?

A) In Filmora, Image Mask allows you to use an image (or any available preset) for masking so that the background footage is cropped to the shape of the picture. This is generally used to create logos and dynamic titles for movies or documentaries. On the other hand, Shape Mask enables you to mask the background clip with the foreground footage in the form of a shape that could be positioned and customized using the available sliders.

2. How many image masks are available in Filmora?

A) At the time of this writing, Wondershare Filmora has around 40 image mask presets. In addition, it also allows you to add custom images from your PC for more dynamic approach.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

From Chrome OS to Linux: A Comprehensive Installation Guide

How to Install Linux on Chromebook

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Get the Inside Scoop on the Top Audio Conversion Software

What Here Can Tell You About 12 Best Audio Converter

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Converting your audio files to the latest formats using the best free audio converter is highly advisable. Wondering about which audio converter is the best mp3 converter?

We’re here today to tell you about the best free MP3 converter.

In this article

01 [Top 6 Best Audio Converter Software for PC](#Part 1)

02 [Top 6 Best Audio Converter Online](#Part 2)

Part 1 Top 6 Best Audio Converter Software for PC

01Freemake audio converter

Freemake audio converter is one of the best audio converter for those who like keeping things simple. The developers of freemake audio converter have avoided any fuss about conversion of audio files. The software makes audio conversion super easy and lets you convert your files within minutes. The software claims that within just 3 clicks, you’d get high quality converted audio.

What We Like:

● The software is free to use, you can download it on your windows device for free

● The user interface is truly simple and hence even a neophyte can use it very easily

● You can convert your files between several different formats

What We Don’t Like:

● Unlike many of its competitors, the software does not offer any audio editing tools

● You need to download different tools by freemake in order to access different features

● The software occupies space on your device unlike it’s online counterparts

Accepted audio formats:

AMR, M4R, MP3, WMA, WAV, FLAC and OGG

Rating: The software is rated 4.8 starts out of 5

A link to a tutorial about using freemake audio converter:

02Any audio converter

The audio converter is one of the best for those who need to do multiple conversions between different file formats. As the name suggests, the any audio converter has a plethora of file formats and hence is an all in one place for your audio conversion needs. Moreover, it’s available for both windows and Mac users and hence is highly versatile. The lossless converter helps you convert not just audio files but also video files. It is infact one of the best audio to video converter.

What We Like:

● The software is an all in one place which allows you to convert audios and videos

● The software has basic editing options

● The software is free of cost

What We Don’t Like:

● The software has only basic editing options and for advance editing, you’d need other softwares.

● The audio conversion is lossy sometimes

● You cannot convert a video from YouTube directly to audio

Accepted audio formats:

WAV, FLAC, OGG, MPEG, MP3, WMV and many other formats

A YouTube tutorial about the audio conversion software:

03Switch audio converter

This audio converter is another free converter which is fast and highly efficient. The cross platform audio converter is highly versatile and is available on windows, Android and Mac devices. The audio conversion is rather simple, all you need to do is upload the audio file you wish to convert into the software and then select the desired file format. Once done, the audio file will automatically be converted to the Desired format. The software is best for individual use, however you can opt for the paid version of the software if you wish to use the software for commercial purposes.

What We Like:

● The software has supports file formats

● The software lets you listen to audios in batches to check for quality

● The software lets you add song information through integration of an online database

What We Don’t Like:

● The free version hands you access to only a limited number of features

● The free version cannot handle the requirements of commercial purposes

● The software does not offer editing options

Accepted audio formats:

Almost all the formats are accepted, the software supports a total of 40 different file formats

A YouTube tutorial about the audio conversion software:

04fre:ac free audio converter

fre:ac free audio converter is another powerful audio converter that allows you to convert audio files between multiple formats. Although the user interface seems pretty dull, the software is highly compact. This means you can carry it even on a disk. The software is however not very sophisticated and pretty simple to use. It allows you to convert your audio files within minutes and could be regarded as a hassle-free method of audio conversion.

What We Like:

● The software allows users to control it from the command line as well

● Users can convert multiple files at once

● It has an integrated CD ripper

What We Don’t Like:

● The user interface isn’t the most appealing one

● It could get confusing if you have no experience with using command line

● The software has no editing options

Accepted audio formats: The software supports almost all the major audio formats

A YouTube tutorial about the audio conversion software:

05Pazera free audio extractor

Pazera free audio extractor is yet another popular converting softwares. The converter is solely built to convert audios from one format to another. The software is perfect for individuals who wish to convert their audio files just for a work or for offices to use commerically. The user interface is pretty appealing and simple to understand. Using this software you can quickly convert files from one format to another within minutes.

What We Like:

● The software is entirely free

● It has multiple languages in its user interface. Not an English native speaker? No problem, you can use this software in your preferred language

● The software is highly portable since you can run and carry it in disks

What We Don’t Like:

● The download process is slightly tedious

● The software does not have any editing options

Accepted audio formats:

The software allows almost all types of files for conversion

A YouTube tutorial about the audio conversion software:

06**Wondershare Filmora Video Editor **

What’s one thing that everyone looks for while choosing a software or while making life choices in general? Comfort We all wish to use the software we’re comfortable or for that matter, we always make choices based on comfort. Are you someone who prefers comfort too? Well then, wondershare Filmora Pro is the right conversion software for you. The software has a plethora of other features which make it a one stop shop for all your audio and video needs. Why take the trouble of downloading multiple softwares for conversion, editing and sharing when you can do it all using Filmora Pro The software offers lossless conversion and a highly user friendly interface

What We Like:

● The software is a one-stop shop for all your audio and video editing needs

● It lets you convert files between multiple formats

● The user interface is highly friendly

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Part 2 Top 6 Best Audio Converter Online

01Audio converter

The name literally says “audio converter”, it literally conveys that “audio conversion is my job and I’m here to convert your audio files”. This online converter offers multiple audio conversion solutions and lets you convert files between different types. The online application is rather helpful since it has several features that allow you to edit your audio. The online tool is perfect for those who need to convert audio files on a regular basis.

What We Like:

● You can perform several conversions without downloading the software

● You can convert video files to audio files

● The software has several editing options and is completely free

What We Don’t Like:

● You’d encounter several annoying advertisements while using the tool

● You need to manually delete the files from the tool in order to ensure privacy

● Several audio formats aren’t supported by the tool.

A YouTube tutorial about the audio conversion tool:

02Onlineconvert.com

The online audio converter is one of the best analog to digital audio converter. This is mainly because of the high versatility of the online tool. You name a format and the online tool supports the particular file format. The software offers you not just audio conversion service but also document conversion, video conversion and other file type conversion. The software is also one of the best video to audio converter. We highly recommend you to give the online application a try

What We Like:

● The tool supports almost every file format

● The tool can perform not just one but multiple kinds of file conversions

● The tool also offers you hash encryption service for your confidential files

What We Don’t Like:

● The tool does not have any editing options

● The user interface isn’t highly friendly

● It allows you to convert only one file at a time

A YouTube tutorial about the audio conversion tool:

03Convertio

Convertio is probably the most well known online file conversion tool. This online service is best for those who need to convert multiple kinds of files on a daily basis. It supports a wide range of file types and hence serves as one stop shop for conversion. The online application has a highly friendly user interface and serves as a quick and efficient method of conversion.

What We Like:

● Supported on all the devices including Mac, windows and Android

● The tool allows you to import files directly from Google drive or Dropbox

● Supports multiple file types

What We Don’t Like:

● The tool is exclusively for conversion and does not have any editing options

● You’d encounter several annoying advertisements while using the online application

A YouTube tutorial about the audio conversion tool:

04Online audio converter

Online audio converter is a highly commended online tool to convert multiple files. It has a catalogue of conversions that it can perform in a few simple steps. The tool is best suited for those who are looking for advance conversions without needing to download a software. The tool is one of the best mp3 converter. It is user friendly and you can convert your files from one format to another within a few clicks

What We Like:

● The online application suppors a huge range of file formats

● It is free to use and can perform conversions quickly

● The tool works well on windows, Mac and Android

What We Don’t Like:

● You can only convert one file at a time, hence, converting multiple files could be very time consuming

● If you wish to access the unlimited version that allows you to convert files in batches, you’d need to pay around $18

● You cannot upload files from cloud services such as drive

A YouTube tutorial about the audio conversion tool:

05Online uniconverter

Online uniconverter is another very popular online file conversion tool. This amazing tool allows you to convert files from one type to another within minutes. Apart from audio conversion, the application also has several other features. The application serves as an audio converter, image compressor, video converter, video editor, image converter and image resize tool. If you’re someone who deals with audio, video and image files on a regular basis, this tool could be of great help to you. Using this online application, you can also make animated gifs All in all, the tool is perfect for those who deal with a lot of files.

What We Like:

● The tool has several additional features such as image conversion, image resizing, video editing , image compression etc

● The online application supports multiple types of files

● The software has a free limited version

What We Don’t Like:

● In order to access the exclusive features of the tool, you’d need to buy the premium version

● You can only perform one conversion at a time

● You’d encounter several annoying advertisements while using the online application

A YouTube tutorial about the audio conversion tool:

06Zamzar

Zamzar Is one of the most popular online converting tools. It does not just have audio conversion features but also image conversion, video conversion and other files conversion. The tool is perfect for individuals who wish to convert their audio files just for a project. However, professionals who need to convert audio files often are not advised to use this platform. The user interface is pretty appealing and colourful and the zamzar convertor allows multiple conversions

What We Like:

● The tool is a one stop shop that allows you to convert multiple files

● The tool allows you to directly share the converted audio via mail. Hence, you needn’t download the audio files

● The tool also has an online version if you wish to use it online

What We Don’t Like:

● The tool limits it’s free usage only to a 50 mb. Upon reaching the limit, you’d need to buy the paid version

● The download process is slightly tedious

● It does not have any editing options

A YouTube tutorial about the audio conversion tool:

Key Takeaways from This Episode

● Today we’ve taken a look at few of the Best Audio Converter

● These softwares range from online ones to downloadable ones. Some of them are available on multiple platforms whereas some are available only on a particular one.

● All in all, we’ve checked out a diverse lot of audio converters. Of all the softwares we’ve seen today, Wondershare Filmora Pro is the most recommended one.

● Filmora is almost synonymous to comfort. It allows you to convert files very effectively within minutes

Try It Free Try It Free

Converting your audio files to the latest formats using the best free audio converter is highly advisable. Wondering about which audio converter is the best mp3 converter?

We’re here today to tell you about the best free MP3 converter.

In this article

01 [Top 6 Best Audio Converter Software for PC](#Part 1)

02 [Top 6 Best Audio Converter Online](#Part 2)

Part 1 Top 6 Best Audio Converter Software for PC

01Freemake audio converter

Freemake audio converter is one of the best audio converter for those who like keeping things simple. The developers of freemake audio converter have avoided any fuss about conversion of audio files. The software makes audio conversion super easy and lets you convert your files within minutes. The software claims that within just 3 clicks, you’d get high quality converted audio.

What We Like:

● The software is free to use, you can download it on your windows device for free

● The user interface is truly simple and hence even a neophyte can use it very easily

● You can convert your files between several different formats

What We Don’t Like:

● Unlike many of its competitors, the software does not offer any audio editing tools

● You need to download different tools by freemake in order to access different features

● The software occupies space on your device unlike it’s online counterparts

Accepted audio formats:

AMR, M4R, MP3, WMA, WAV, FLAC and OGG

Rating: The software is rated 4.8 starts out of 5

A link to a tutorial about using freemake audio converter:

02Any audio converter

The audio converter is one of the best for those who need to do multiple conversions between different file formats. As the name suggests, the any audio converter has a plethora of file formats and hence is an all in one place for your audio conversion needs. Moreover, it’s available for both windows and Mac users and hence is highly versatile. The lossless converter helps you convert not just audio files but also video files. It is infact one of the best audio to video converter.

What We Like:

● The software is an all in one place which allows you to convert audios and videos

● The software has basic editing options

● The software is free of cost

What We Don’t Like:

● The software has only basic editing options and for advance editing, you’d need other softwares.

● The audio conversion is lossy sometimes

● You cannot convert a video from YouTube directly to audio

Accepted audio formats:

WAV, FLAC, OGG, MPEG, MP3, WMV and many other formats

A YouTube tutorial about the audio conversion software:

03Switch audio converter

This audio converter is another free converter which is fast and highly efficient. The cross platform audio converter is highly versatile and is available on windows, Android and Mac devices. The audio conversion is rather simple, all you need to do is upload the audio file you wish to convert into the software and then select the desired file format. Once done, the audio file will automatically be converted to the Desired format. The software is best for individual use, however you can opt for the paid version of the software if you wish to use the software for commercial purposes.

What We Like:

● The software has supports file formats

● The software lets you listen to audios in batches to check for quality

● The software lets you add song information through integration of an online database

What We Don’t Like:

● The free version hands you access to only a limited number of features

● The free version cannot handle the requirements of commercial purposes

● The software does not offer editing options

Accepted audio formats:

Almost all the formats are accepted, the software supports a total of 40 different file formats

A YouTube tutorial about the audio conversion software:

04fre:ac free audio converter

fre:ac free audio converter is another powerful audio converter that allows you to convert audio files between multiple formats. Although the user interface seems pretty dull, the software is highly compact. This means you can carry it even on a disk. The software is however not very sophisticated and pretty simple to use. It allows you to convert your audio files within minutes and could be regarded as a hassle-free method of audio conversion.

What We Like:

● The software allows users to control it from the command line as well

● Users can convert multiple files at once

● It has an integrated CD ripper

What We Don’t Like:

● The user interface isn’t the most appealing one

● It could get confusing if you have no experience with using command line

● The software has no editing options

Accepted audio formats: The software supports almost all the major audio formats

A YouTube tutorial about the audio conversion software:

05Pazera free audio extractor

Pazera free audio extractor is yet another popular converting softwares. The converter is solely built to convert audios from one format to another. The software is perfect for individuals who wish to convert their audio files just for a work or for offices to use commerically. The user interface is pretty appealing and simple to understand. Using this software you can quickly convert files from one format to another within minutes.

What We Like:

● The software is entirely free

● It has multiple languages in its user interface. Not an English native speaker? No problem, you can use this software in your preferred language

● The software is highly portable since you can run and carry it in disks

What We Don’t Like:

● The download process is slightly tedious

● The software does not have any editing options

Accepted audio formats:

The software allows almost all types of files for conversion

A YouTube tutorial about the audio conversion software:

06**Wondershare Filmora Video Editor **

What’s one thing that everyone looks for while choosing a software or while making life choices in general? Comfort We all wish to use the software we’re comfortable or for that matter, we always make choices based on comfort. Are you someone who prefers comfort too? Well then, wondershare Filmora Pro is the right conversion software for you. The software has a plethora of other features which make it a one stop shop for all your audio and video needs. Why take the trouble of downloading multiple softwares for conversion, editing and sharing when you can do it all using Filmora Pro The software offers lossless conversion and a highly user friendly interface

What We Like:

● The software is a one-stop shop for all your audio and video editing needs

● It lets you convert files between multiple formats

● The user interface is highly friendly

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Part 2 Top 6 Best Audio Converter Online

01Audio converter

The name literally says “audio converter”, it literally conveys that “audio conversion is my job and I’m here to convert your audio files”. This online converter offers multiple audio conversion solutions and lets you convert files between different types. The online application is rather helpful since it has several features that allow you to edit your audio. The online tool is perfect for those who need to convert audio files on a regular basis.

What We Like:

● You can perform several conversions without downloading the software

● You can convert video files to audio files

● The software has several editing options and is completely free

What We Don’t Like:

● You’d encounter several annoying advertisements while using the tool

● You need to manually delete the files from the tool in order to ensure privacy

● Several audio formats aren’t supported by the tool.

A YouTube tutorial about the audio conversion tool:

02Onlineconvert.com

The online audio converter is one of the best analog to digital audio converter. This is mainly because of the high versatility of the online tool. You name a format and the online tool supports the particular file format. The software offers you not just audio conversion service but also document conversion, video conversion and other file type conversion. The software is also one of the best video to audio converter. We highly recommend you to give the online application a try

What We Like:

● The tool supports almost every file format

● The tool can perform not just one but multiple kinds of file conversions

● The tool also offers you hash encryption service for your confidential files

What We Don’t Like:

● The tool does not have any editing options

● The user interface isn’t highly friendly

● It allows you to convert only one file at a time

A YouTube tutorial about the audio conversion tool:

03Convertio

Convertio is probably the most well known online file conversion tool. This online service is best for those who need to convert multiple kinds of files on a daily basis. It supports a wide range of file types and hence serves as one stop shop for conversion. The online application has a highly friendly user interface and serves as a quick and efficient method of conversion.

What We Like:

● Supported on all the devices including Mac, windows and Android

● The tool allows you to import files directly from Google drive or Dropbox

● Supports multiple file types

What We Don’t Like:

● The tool is exclusively for conversion and does not have any editing options

● You’d encounter several annoying advertisements while using the online application

A YouTube tutorial about the audio conversion tool:

04Online audio converter

Online audio converter is a highly commended online tool to convert multiple files. It has a catalogue of conversions that it can perform in a few simple steps. The tool is best suited for those who are looking for advance conversions without needing to download a software. The tool is one of the best mp3 converter. It is user friendly and you can convert your files from one format to another within a few clicks

What We Like:

● The online application suppors a huge range of file formats

● It is free to use and can perform conversions quickly

● The tool works well on windows, Mac and Android

What We Don’t Like:

● You can only convert one file at a time, hence, converting multiple files could be very time consuming

● If you wish to access the unlimited version that allows you to convert files in batches, you’d need to pay around $18

● You cannot upload files from cloud services such as drive

A YouTube tutorial about the audio conversion tool:

05Online uniconverter

Online uniconverter is another very popular online file conversion tool. This amazing tool allows you to convert files from one type to another within minutes. Apart from audio conversion, the application also has several other features. The application serves as an audio converter, image compressor, video converter, video editor, image converter and image resize tool. If you’re someone who deals with audio, video and image files on a regular basis, this tool could be of great help to you. Using this online application, you can also make animated gifs All in all, the tool is perfect for those who deal with a lot of files.

What We Like:

● The tool has several additional features such as image conversion, image resizing, video editing , image compression etc

● The online application supports multiple types of files

● The software has a free limited version

What We Don’t Like:

● In order to access the exclusive features of the tool, you’d need to buy the premium version

● You can only perform one conversion at a time

● You’d encounter several annoying advertisements while using the online application

A YouTube tutorial about the audio conversion tool:

06Zamzar

Zamzar Is one of the most popular online converting tools. It does not just have audio conversion features but also image conversion, video conversion and other files conversion. The tool is perfect for individuals who wish to convert their audio files just for a project. However, professionals who need to convert audio files often are not advised to use this platform. The user interface is pretty appealing and colourful and the zamzar convertor allows multiple conversions

What We Like:

● The tool is a one stop shop that allows you to convert multiple files

● The tool allows you to directly share the converted audio via mail. Hence, you needn’t download the audio files

● The tool also has an online version if you wish to use it online

What We Don’t Like:

● The tool limits it’s free usage only to a 50 mb. Upon reaching the limit, you’d need to buy the paid version

● The download process is slightly tedious

● It does not have any editing options

A YouTube tutorial about the audio conversion tool:

Key Takeaways from This Episode

● Today we’ve taken a look at few of the Best Audio Converter

● These softwares range from online ones to downloadable ones. Some of them are available on multiple platforms whereas some are available only on a particular one.

● All in all, we’ve checked out a diverse lot of audio converters. Of all the softwares we’ve seen today, Wondershare Filmora Pro is the most recommended one.

● Filmora is almost synonymous to comfort. It allows you to convert files very effectively within minutes

Try It Free Try It Free

Converting your audio files to the latest formats using the best free audio converter is highly advisable. Wondering about which audio converter is the best mp3 converter?

We’re here today to tell you about the best free MP3 converter.

In this article

01 [Top 6 Best Audio Converter Software for PC](#Part 1)

02 [Top 6 Best Audio Converter Online](#Part 2)

Part 1 Top 6 Best Audio Converter Software for PC

01Freemake audio converter

Freemake audio converter is one of the best audio converter for those who like keeping things simple. The developers of freemake audio converter have avoided any fuss about conversion of audio files. The software makes audio conversion super easy and lets you convert your files within minutes. The software claims that within just 3 clicks, you’d get high quality converted audio.

What We Like:

● The software is free to use, you can download it on your windows device for free

● The user interface is truly simple and hence even a neophyte can use it very easily

● You can convert your files between several different formats

What We Don’t Like:

● Unlike many of its competitors, the software does not offer any audio editing tools

● You need to download different tools by freemake in order to access different features

● The software occupies space on your device unlike it’s online counterparts

Accepted audio formats:

AMR, M4R, MP3, WMA, WAV, FLAC and OGG

Rating: The software is rated 4.8 starts out of 5

A link to a tutorial about using freemake audio converter:

02Any audio converter

The audio converter is one of the best for those who need to do multiple conversions between different file formats. As the name suggests, the any audio converter has a plethora of file formats and hence is an all in one place for your audio conversion needs. Moreover, it’s available for both windows and Mac users and hence is highly versatile. The lossless converter helps you convert not just audio files but also video files. It is infact one of the best audio to video converter.

What We Like:

● The software is an all in one place which allows you to convert audios and videos

● The software has basic editing options

● The software is free of cost

What We Don’t Like:

● The software has only basic editing options and for advance editing, you’d need other softwares.

● The audio conversion is lossy sometimes

● You cannot convert a video from YouTube directly to audio

Accepted audio formats:

WAV, FLAC, OGG, MPEG, MP3, WMV and many other formats

A YouTube tutorial about the audio conversion software:

03Switch audio converter

This audio converter is another free converter which is fast and highly efficient. The cross platform audio converter is highly versatile and is available on windows, Android and Mac devices. The audio conversion is rather simple, all you need to do is upload the audio file you wish to convert into the software and then select the desired file format. Once done, the audio file will automatically be converted to the Desired format. The software is best for individual use, however you can opt for the paid version of the software if you wish to use the software for commercial purposes.

What We Like:

● The software has supports file formats

● The software lets you listen to audios in batches to check for quality

● The software lets you add song information through integration of an online database

What We Don’t Like:

● The free version hands you access to only a limited number of features

● The free version cannot handle the requirements of commercial purposes

● The software does not offer editing options

Accepted audio formats:

Almost all the formats are accepted, the software supports a total of 40 different file formats

A YouTube tutorial about the audio conversion software:

04fre:ac free audio converter

fre:ac free audio converter is another powerful audio converter that allows you to convert audio files between multiple formats. Although the user interface seems pretty dull, the software is highly compact. This means you can carry it even on a disk. The software is however not very sophisticated and pretty simple to use. It allows you to convert your audio files within minutes and could be regarded as a hassle-free method of audio conversion.

What We Like:

● The software allows users to control it from the command line as well

● Users can convert multiple files at once

● It has an integrated CD ripper

What We Don’t Like:

● The user interface isn’t the most appealing one

● It could get confusing if you have no experience with using command line

● The software has no editing options

Accepted audio formats: The software supports almost all the major audio formats

A YouTube tutorial about the audio conversion software:

05Pazera free audio extractor

Pazera free audio extractor is yet another popular converting softwares. The converter is solely built to convert audios from one format to another. The software is perfect for individuals who wish to convert their audio files just for a work or for offices to use commerically. The user interface is pretty appealing and simple to understand. Using this software you can quickly convert files from one format to another within minutes.

What We Like:

● The software is entirely free

● It has multiple languages in its user interface. Not an English native speaker? No problem, you can use this software in your preferred language

● The software is highly portable since you can run and carry it in disks

What We Don’t Like:

● The download process is slightly tedious

● The software does not have any editing options

Accepted audio formats:

The software allows almost all types of files for conversion

A YouTube tutorial about the audio conversion software:

06**Wondershare Filmora Video Editor **

What’s one thing that everyone looks for while choosing a software or while making life choices in general? Comfort We all wish to use the software we’re comfortable or for that matter, we always make choices based on comfort. Are you someone who prefers comfort too? Well then, wondershare Filmora Pro is the right conversion software for you. The software has a plethora of other features which make it a one stop shop for all your audio and video needs. Why take the trouble of downloading multiple softwares for conversion, editing and sharing when you can do it all using Filmora Pro The software offers lossless conversion and a highly user friendly interface

What We Like:

● The software is a one-stop shop for all your audio and video editing needs

● It lets you convert files between multiple formats

● The user interface is highly friendly

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Part 2 Top 6 Best Audio Converter Online

01Audio converter

The name literally says “audio converter”, it literally conveys that “audio conversion is my job and I’m here to convert your audio files”. This online converter offers multiple audio conversion solutions and lets you convert files between different types. The online application is rather helpful since it has several features that allow you to edit your audio. The online tool is perfect for those who need to convert audio files on a regular basis.

What We Like:

● You can perform several conversions without downloading the software

● You can convert video files to audio files

● The software has several editing options and is completely free

What We Don’t Like:

● You’d encounter several annoying advertisements while using the tool

● You need to manually delete the files from the tool in order to ensure privacy

● Several audio formats aren’t supported by the tool.

A YouTube tutorial about the audio conversion tool:

02Onlineconvert.com

The online audio converter is one of the best analog to digital audio converter. This is mainly because of the high versatility of the online tool. You name a format and the online tool supports the particular file format. The software offers you not just audio conversion service but also document conversion, video conversion and other file type conversion. The software is also one of the best video to audio converter. We highly recommend you to give the online application a try

What We Like:

● The tool supports almost every file format

● The tool can perform not just one but multiple kinds of file conversions

● The tool also offers you hash encryption service for your confidential files

What We Don’t Like:

● The tool does not have any editing options

● The user interface isn’t highly friendly

● It allows you to convert only one file at a time

A YouTube tutorial about the audio conversion tool:

03Convertio

Convertio is probably the most well known online file conversion tool. This online service is best for those who need to convert multiple kinds of files on a daily basis. It supports a wide range of file types and hence serves as one stop shop for conversion. The online application has a highly friendly user interface and serves as a quick and efficient method of conversion.

What We Like:

● Supported on all the devices including Mac, windows and Android

● The tool allows you to import files directly from Google drive or Dropbox

● Supports multiple file types

What We Don’t Like:

● The tool is exclusively for conversion and does not have any editing options

● You’d encounter several annoying advertisements while using the online application

A YouTube tutorial about the audio conversion tool:

04Online audio converter

Online audio converter is a highly commended online tool to convert multiple files. It has a catalogue of conversions that it can perform in a few simple steps. The tool is best suited for those who are looking for advance conversions without needing to download a software. The tool is one of the best mp3 converter. It is user friendly and you can convert your files from one format to another within a few clicks

What We Like:

● The online application suppors a huge range of file formats

● It is free to use and can perform conversions quickly

● The tool works well on windows, Mac and Android

What We Don’t Like:

● You can only convert one file at a time, hence, converting multiple files could be very time consuming

● If you wish to access the unlimited version that allows you to convert files in batches, you’d need to pay around $18

● You cannot upload files from cloud services such as drive

A YouTube tutorial about the audio conversion tool:

05Online uniconverter

Online uniconverter is another very popular online file conversion tool. This amazing tool allows you to convert files from one type to another within minutes. Apart from audio conversion, the application also has several other features. The application serves as an audio converter, image compressor, video converter, video editor, image converter and image resize tool. If you’re someone who deals with audio, video and image files on a regular basis, this tool could be of great help to you. Using this online application, you can also make animated gifs All in all, the tool is perfect for those who deal with a lot of files.

What We Like:

● The tool has several additional features such as image conversion, image resizing, video editing , image compression etc

● The online application supports multiple types of files

● The software has a free limited version

What We Don’t Like:

● In order to access the exclusive features of the tool, you’d need to buy the premium version

● You can only perform one conversion at a time

● You’d encounter several annoying advertisements while using the online application

A YouTube tutorial about the audio conversion tool:

06Zamzar

Zamzar Is one of the most popular online converting tools. It does not just have audio conversion features but also image conversion, video conversion and other files conversion. The tool is perfect for individuals who wish to convert their audio files just for a project. However, professionals who need to convert audio files often are not advised to use this platform. The user interface is pretty appealing and colourful and the zamzar convertor allows multiple conversions

What We Like:

● The tool is a one stop shop that allows you to convert multiple files

● The tool allows you to directly share the converted audio via mail. Hence, you needn’t download the audio files

● The tool also has an online version if you wish to use it online

What We Don’t Like:

● The tool limits it’s free usage only to a 50 mb. Upon reaching the limit, you’d need to buy the paid version

● The download process is slightly tedious

● It does not have any editing options

A YouTube tutorial about the audio conversion tool:

Key Takeaways from This Episode

● Today we’ve taken a look at few of the Best Audio Converter

● These softwares range from online ones to downloadable ones. Some of them are available on multiple platforms whereas some are available only on a particular one.

● All in all, we’ve checked out a diverse lot of audio converters. Of all the softwares we’ve seen today, Wondershare Filmora Pro is the most recommended one.

● Filmora is almost synonymous to comfort. It allows you to convert files very effectively within minutes

Try It Free Try It Free

Converting your audio files to the latest formats using the best free audio converter is highly advisable. Wondering about which audio converter is the best mp3 converter?

We’re here today to tell you about the best free MP3 converter.

In this article

01 [Top 6 Best Audio Converter Software for PC](#Part 1)

02 [Top 6 Best Audio Converter Online](#Part 2)

Part 1 Top 6 Best Audio Converter Software for PC

01Freemake audio converter

Freemake audio converter is one of the best audio converter for those who like keeping things simple. The developers of freemake audio converter have avoided any fuss about conversion of audio files. The software makes audio conversion super easy and lets you convert your files within minutes. The software claims that within just 3 clicks, you’d get high quality converted audio.

What We Like:

● The software is free to use, you can download it on your windows device for free

● The user interface is truly simple and hence even a neophyte can use it very easily

● You can convert your files between several different formats

What We Don’t Like:

● Unlike many of its competitors, the software does not offer any audio editing tools

● You need to download different tools by freemake in order to access different features

● The software occupies space on your device unlike it’s online counterparts

Accepted audio formats:

AMR, M4R, MP3, WMA, WAV, FLAC and OGG

Rating: The software is rated 4.8 starts out of 5

A link to a tutorial about using freemake audio converter:

02Any audio converter

The audio converter is one of the best for those who need to do multiple conversions between different file formats. As the name suggests, the any audio converter has a plethora of file formats and hence is an all in one place for your audio conversion needs. Moreover, it’s available for both windows and Mac users and hence is highly versatile. The lossless converter helps you convert not just audio files but also video files. It is infact one of the best audio to video converter.

What We Like:

● The software is an all in one place which allows you to convert audios and videos

● The software has basic editing options

● The software is free of cost

What We Don’t Like:

● The software has only basic editing options and for advance editing, you’d need other softwares.

● The audio conversion is lossy sometimes

● You cannot convert a video from YouTube directly to audio

Accepted audio formats:

WAV, FLAC, OGG, MPEG, MP3, WMV and many other formats

A YouTube tutorial about the audio conversion software:

03Switch audio converter

This audio converter is another free converter which is fast and highly efficient. The cross platform audio converter is highly versatile and is available on windows, Android and Mac devices. The audio conversion is rather simple, all you need to do is upload the audio file you wish to convert into the software and then select the desired file format. Once done, the audio file will automatically be converted to the Desired format. The software is best for individual use, however you can opt for the paid version of the software if you wish to use the software for commercial purposes.

What We Like:

● The software has supports file formats

● The software lets you listen to audios in batches to check for quality

● The software lets you add song information through integration of an online database

What We Don’t Like:

● The free version hands you access to only a limited number of features

● The free version cannot handle the requirements of commercial purposes

● The software does not offer editing options

Accepted audio formats:

Almost all the formats are accepted, the software supports a total of 40 different file formats

A YouTube tutorial about the audio conversion software:

04fre:ac free audio converter

fre:ac free audio converter is another powerful audio converter that allows you to convert audio files between multiple formats. Although the user interface seems pretty dull, the software is highly compact. This means you can carry it even on a disk. The software is however not very sophisticated and pretty simple to use. It allows you to convert your audio files within minutes and could be regarded as a hassle-free method of audio conversion.

What We Like:

● The software allows users to control it from the command line as well

● Users can convert multiple files at once

● It has an integrated CD ripper

What We Don’t Like:

● The user interface isn’t the most appealing one

● It could get confusing if you have no experience with using command line

● The software has no editing options

Accepted audio formats: The software supports almost all the major audio formats

A YouTube tutorial about the audio conversion software:

05Pazera free audio extractor

Pazera free audio extractor is yet another popular converting softwares. The converter is solely built to convert audios from one format to another. The software is perfect for individuals who wish to convert their audio files just for a work or for offices to use commerically. The user interface is pretty appealing and simple to understand. Using this software you can quickly convert files from one format to another within minutes.

What We Like:

● The software is entirely free

● It has multiple languages in its user interface. Not an English native speaker? No problem, you can use this software in your preferred language

● The software is highly portable since you can run and carry it in disks

What We Don’t Like:

● The download process is slightly tedious

● The software does not have any editing options

Accepted audio formats:

The software allows almost all types of files for conversion

A YouTube tutorial about the audio conversion software:

06**Wondershare Filmora Video Editor **

What’s one thing that everyone looks for while choosing a software or while making life choices in general? Comfort We all wish to use the software we’re comfortable or for that matter, we always make choices based on comfort. Are you someone who prefers comfort too? Well then, wondershare Filmora Pro is the right conversion software for you. The software has a plethora of other features which make it a one stop shop for all your audio and video needs. Why take the trouble of downloading multiple softwares for conversion, editing and sharing when you can do it all using Filmora Pro The software offers lossless conversion and a highly user friendly interface

What We Like:

● The software is a one-stop shop for all your audio and video editing needs

● It lets you convert files between multiple formats

● The user interface is highly friendly

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Part 2 Top 6 Best Audio Converter Online

01Audio converter

The name literally says “audio converter”, it literally conveys that “audio conversion is my job and I’m here to convert your audio files”. This online converter offers multiple audio conversion solutions and lets you convert files between different types. The online application is rather helpful since it has several features that allow you to edit your audio. The online tool is perfect for those who need to convert audio files on a regular basis.

What We Like:

● You can perform several conversions without downloading the software

● You can convert video files to audio files

● The software has several editing options and is completely free

What We Don’t Like:

● You’d encounter several annoying advertisements while using the tool

● You need to manually delete the files from the tool in order to ensure privacy

● Several audio formats aren’t supported by the tool.

A YouTube tutorial about the audio conversion tool:

02Onlineconvert.com

The online audio converter is one of the best analog to digital audio converter. This is mainly because of the high versatility of the online tool. You name a format and the online tool supports the particular file format. The software offers you not just audio conversion service but also document conversion, video conversion and other file type conversion. The software is also one of the best video to audio converter. We highly recommend you to give the online application a try

What We Like:

● The tool supports almost every file format

● The tool can perform not just one but multiple kinds of file conversions

● The tool also offers you hash encryption service for your confidential files

What We Don’t Like:

● The tool does not have any editing options

● The user interface isn’t highly friendly

● It allows you to convert only one file at a time

A YouTube tutorial about the audio conversion tool:

03Convertio

Convertio is probably the most well known online file conversion tool. This online service is best for those who need to convert multiple kinds of files on a daily basis. It supports a wide range of file types and hence serves as one stop shop for conversion. The online application has a highly friendly user interface and serves as a quick and efficient method of conversion.

What We Like:

● Supported on all the devices including Mac, windows and Android

● The tool allows you to import files directly from Google drive or Dropbox

● Supports multiple file types

What We Don’t Like:

● The tool is exclusively for conversion and does not have any editing options

● You’d encounter several annoying advertisements while using the online application

A YouTube tutorial about the audio conversion tool:

04Online audio converter

Online audio converter is a highly commended online tool to convert multiple files. It has a catalogue of conversions that it can perform in a few simple steps. The tool is best suited for those who are looking for advance conversions without needing to download a software. The tool is one of the best mp3 converter. It is user friendly and you can convert your files from one format to another within a few clicks

What We Like:

● The online application suppors a huge range of file formats

● It is free to use and can perform conversions quickly

● The tool works well on windows, Mac and Android

What We Don’t Like:

● You can only convert one file at a time, hence, converting multiple files could be very time consuming

● If you wish to access the unlimited version that allows you to convert files in batches, you’d need to pay around $18

● You cannot upload files from cloud services such as drive

A YouTube tutorial about the audio conversion tool:

05Online uniconverter

Online uniconverter is another very popular online file conversion tool. This amazing tool allows you to convert files from one type to another within minutes. Apart from audio conversion, the application also has several other features. The application serves as an audio converter, image compressor, video converter, video editor, image converter and image resize tool. If you’re someone who deals with audio, video and image files on a regular basis, this tool could be of great help to you. Using this online application, you can also make animated gifs All in all, the tool is perfect for those who deal with a lot of files.

What We Like:

● The tool has several additional features such as image conversion, image resizing, video editing , image compression etc

● The online application supports multiple types of files

● The software has a free limited version

What We Don’t Like:

● In order to access the exclusive features of the tool, you’d need to buy the premium version

● You can only perform one conversion at a time

● You’d encounter several annoying advertisements while using the online application

A YouTube tutorial about the audio conversion tool:

06Zamzar

Zamzar Is one of the most popular online converting tools. It does not just have audio conversion features but also image conversion, video conversion and other files conversion. The tool is perfect for individuals who wish to convert their audio files just for a project. However, professionals who need to convert audio files often are not advised to use this platform. The user interface is pretty appealing and colourful and the zamzar convertor allows multiple conversions

What We Like:

● The tool is a one stop shop that allows you to convert multiple files

● The tool allows you to directly share the converted audio via mail. Hence, you needn’t download the audio files

● The tool also has an online version if you wish to use it online

What We Don’t Like:

● The tool limits it’s free usage only to a 50 mb. Upon reaching the limit, you’d need to buy the paid version

● The download process is slightly tedious

● It does not have any editing options

A YouTube tutorial about the audio conversion tool:

Key Takeaways from This Episode

● Today we’ve taken a look at few of the Best Audio Converter

● These softwares range from online ones to downloadable ones. Some of them are available on multiple platforms whereas some are available only on a particular one.

● All in all, we’ve checked out a diverse lot of audio converters. Of all the softwares we’ve seen today, Wondershare Filmora Pro is the most recommended one.

● Filmora is almost synonymous to comfort. It allows you to convert files very effectively within minutes

Also read: