![Use Auto-Sync of Final Cut Pro to Deal with Out of Sync Problem in You Video. This Article Shows You How and More for 2024](https://www.lifewire.com/thmb/is45Yw-eZ0hbBH1GVSPPw-e8Duo=/400x300/filters:no_upscale():max_bytes(150000):strip_icc():format(webp)/samsung-smart-tv-lifestyle-alt-5c89160046e0fb00013365c2.jpg)
Use Auto-Sync of Final Cut Pro to Deal with Out of Sync Problem in You Video. This Article Shows You How and More for 2024
![](/images/site-logo.png)
Use Auto-Sync of Final Cut Pro to Deal with Out of Sync Problem in You Video. This Article Shows You How and More
Practical Guide: How to Sync Audio and Video in Final Cut Pro X 2024
Shanoon Cox
Mar 27, 2024• Proven solutions
Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.
Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.
Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.
Part 1: How to Fix Audio and Video Sync Issue?
Why is Audio and Video out of Sync in Final Cut Pro X?
The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.
Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.
If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.
- Set the Canvas size to “Fit Window”
- Prevent the Canvas and Viewer from overlapping
- Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
- Set the control panel resolution must be to 75A Hz or higher
- Do not select too many real-time audio tracks
- Turn off the Mirror to Desktop option
- Avoid opening multiple sequences simultaneously
- Render the video sequence to a single file.
Part 2: How to Auto-sync in Final Cut Pro X?
Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.
To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.
Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.
This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.
Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.
And download Filmora to have a try!
In case you may want to learn how to Edit the Beat and Sync Videos to Music.
Best Video Editing Apps to Sync Video to the Beat of a Song.
Part 3: How to Match Audio and Video Manually in Final Cut Pro X?
After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.
Follow these simple steps to sync audio and video manually with Final Cut Pro X:
- First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
- Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;
- Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;
- Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
- Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.
Part 4: Fast Ways to Sync Multicam in Final Cut Pro X
Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.
Follow these steps to create Multicam clips:
- Create unique folders and put all clips from each camera in these folders separately.
- Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
- In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
- If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
- In the Event Browser, select multiple clips captured with one camera or audio recorder.
- Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
- Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
- In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
- Click the checkbox “Use Audio for Synchronization” to sync audio.
This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.
Conclusion
Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.
Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.
You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .
Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Shanoon Cox
Mar 27, 2024• Proven solutions
Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.
Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.
Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.
Part 1: How to Fix Audio and Video Sync Issue?
Why is Audio and Video out of Sync in Final Cut Pro X?
The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.
Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.
If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.
- Set the Canvas size to “Fit Window”
- Prevent the Canvas and Viewer from overlapping
- Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
- Set the control panel resolution must be to 75A Hz or higher
- Do not select too many real-time audio tracks
- Turn off the Mirror to Desktop option
- Avoid opening multiple sequences simultaneously
- Render the video sequence to a single file.
Part 2: How to Auto-sync in Final Cut Pro X?
Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.
To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.
Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.
This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.
Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.
And download Filmora to have a try!
In case you may want to learn how to Edit the Beat and Sync Videos to Music.
Best Video Editing Apps to Sync Video to the Beat of a Song.
Part 3: How to Match Audio and Video Manually in Final Cut Pro X?
After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.
Follow these simple steps to sync audio and video manually with Final Cut Pro X:
- First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
- Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;
- Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;
- Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
- Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.
Part 4: Fast Ways to Sync Multicam in Final Cut Pro X
Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.
Follow these steps to create Multicam clips:
- Create unique folders and put all clips from each camera in these folders separately.
- Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
- In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
- If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
- In the Event Browser, select multiple clips captured with one camera or audio recorder.
- Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
- Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
- In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
- Click the checkbox “Use Audio for Synchronization” to sync audio.
This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.
Conclusion
Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.
Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.
You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .
Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Shanoon Cox
Mar 27, 2024• Proven solutions
Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.
Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.
Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.
Part 1: How to Fix Audio and Video Sync Issue?
Why is Audio and Video out of Sync in Final Cut Pro X?
The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.
Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.
If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.
- Set the Canvas size to “Fit Window”
- Prevent the Canvas and Viewer from overlapping
- Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
- Set the control panel resolution must be to 75A Hz or higher
- Do not select too many real-time audio tracks
- Turn off the Mirror to Desktop option
- Avoid opening multiple sequences simultaneously
- Render the video sequence to a single file.
Part 2: How to Auto-sync in Final Cut Pro X?
Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.
To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.
Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.
This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.
Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.
And download Filmora to have a try!
In case you may want to learn how to Edit the Beat and Sync Videos to Music.
Best Video Editing Apps to Sync Video to the Beat of a Song.
Part 3: How to Match Audio and Video Manually in Final Cut Pro X?
After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.
Follow these simple steps to sync audio and video manually with Final Cut Pro X:
- First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
- Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;
- Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;
- Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
- Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.
Part 4: Fast Ways to Sync Multicam in Final Cut Pro X
Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.
Follow these steps to create Multicam clips:
- Create unique folders and put all clips from each camera in these folders separately.
- Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
- In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
- If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
- In the Event Browser, select multiple clips captured with one camera or audio recorder.
- Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
- Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
- In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
- Click the checkbox “Use Audio for Synchronization” to sync audio.
This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.
Conclusion
Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.
Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.
You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .
Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Shanoon Cox
Mar 27, 2024• Proven solutions
Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.
Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.
Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.
Part 1: How to Fix Audio and Video Sync Issue?
Why is Audio and Video out of Sync in Final Cut Pro X?
The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.
Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.
If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.
- Set the Canvas size to “Fit Window”
- Prevent the Canvas and Viewer from overlapping
- Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
- Set the control panel resolution must be to 75A Hz or higher
- Do not select too many real-time audio tracks
- Turn off the Mirror to Desktop option
- Avoid opening multiple sequences simultaneously
- Render the video sequence to a single file.
Part 2: How to Auto-sync in Final Cut Pro X?
Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.
To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.
Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.
This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.
Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.
And download Filmora to have a try!
In case you may want to learn how to Edit the Beat and Sync Videos to Music.
Best Video Editing Apps to Sync Video to the Beat of a Song.
Part 3: How to Match Audio and Video Manually in Final Cut Pro X?
After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.
Follow these simple steps to sync audio and video manually with Final Cut Pro X:
- First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
- Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;
- Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;
- Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
- Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.
Part 4: Fast Ways to Sync Multicam in Final Cut Pro X
Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.
Follow these steps to create Multicam clips:
- Create unique folders and put all clips from each camera in these folders separately.
- Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
- In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
- If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
- In the Event Browser, select multiple clips captured with one camera or audio recorder.
- Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
- Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
- In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
- Click the checkbox “Use Audio for Synchronization” to sync audio.
This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.
Conclusion
Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.
Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.
You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .
Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Flip Your Videos Fast: A Beginner’s Guide to Rotation
How to Flip Video Quickly and Easily
Ollie Mattison
Mar 27, 2024• Proven solutions
It’s very common that you filmed some amazing portrait or landscape videos but in the wrong direction. This is an error made by many people because not everyone will always think about orientation when filming. Is there an easy way to flip/rotate videos so that you can watch them without turning your head sideways?
What you need is just an ease to use video editor like Wondershare Filmora to flip/rotate your video clips easily and quickly. This application offers a remarkably easy way to flip videos clockwise or anticlockwise, horizontal or vertical. What’s more, this flip software also offers a broad range of video editing features, effects and intro/credits.
In the following, I’ll describe how to flip a video in Windows using this video flip program. If you’re a Mac user, just adopt Wondershare Filmora X for Mac (Latest Filmora version X for Mac) to achieve the same.
First, please download Filmora X for free as per your operating system, and then follow the steps below.
1. Import Your Original Video Clips
After launching Filmora X, click “New Project” to begin. Click “Import” to browse your file folder on computer or drag the video clips directly into the media library.
When you import all of them, click the thumbnails showing in the left pane to preview in the right screen window.
Note that this video editor supports an array of video & audio formats, such as MOV, MP4, AVI, WMV, DV, avchd (MTS, M2TS). And still image files like JPG, BMP, JPEG, PNG. TIFF are all fully compatible.
And then drag your video files from media library to the video Timeline.
Learn the complete list of supported files formats of Filmora X.
2. Flip the Whole Video
Then double click the video in the timeline to access the editing panel. In the window that appears, switch to Video tab and you will find Transform option located on the top.
Click on the Transform to expand the four options including Rotate, Flip, Scale and Position. To get the effect you need, you can adjust the Rotate and Flip settings and check the real-time effect in the previewing window. Though only four buttons available, you can create more options by using them together.
- Rotate: rotate video at any angle by entering the angle value or moving the Rotate slide: rotate 90° clockwise & anti-clockwise, rotate at 180°, rotate 270°, and more
- Flip: Flip video horizontally, i.e. flip video left to right; flip video vertically that is fliping video upside down
- You can combine Rotate and Flip feature to flip video vertically and rotate 90°clockwise or flip video vertically and rotate 90°counterclockwise.
Besides, you can also change the video position and the video scale. This is the step of flips the whole part of the video.
3. Flip Only a Part of the Video
Sometimes, you may just need to flip parts of your video file, e.g. only 1 minute instead of the whole video. In this case, you need to split your video into separate files , and then repeat step 2 to flip them individually.
To do it, just move the playhead to the position you want to split, and click the “Scissors” icon in the menu bar.
Learn more about how to split videos
4 Export Flipped Video
When you’re satisfied with the result, click “Export” in the middle right to save the flipped video. In the pop-up output window that appears, select your wanted format or configured preset for your portable player directly to watch on the go.
You may also want to upload your creation to YouTube or burn to DVD disc for better preservation, just go for it. Finally, click Export to let this video flip program perform the rest.
With the latest Filmora X video editor, you can do more than just flipping video files. For example, you can apply special effects, add background music, create picture-in-picture effect, and more. Try it now!
Check Best Program to Flip Video
Conclusion
If you are someone that can’t be bothered to learn a new video editor or someone that doesn’t want to fuss around and just want to get things done, Filmora is designed for you. Known for its lowest learning curve and low price, Filmora can help you to get the job done easily. Try it out with the buttons below to see if it matches your appetite.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
It’s very common that you filmed some amazing portrait or landscape videos but in the wrong direction. This is an error made by many people because not everyone will always think about orientation when filming. Is there an easy way to flip/rotate videos so that you can watch them without turning your head sideways?
What you need is just an ease to use video editor like Wondershare Filmora to flip/rotate your video clips easily and quickly. This application offers a remarkably easy way to flip videos clockwise or anticlockwise, horizontal or vertical. What’s more, this flip software also offers a broad range of video editing features, effects and intro/credits.
In the following, I’ll describe how to flip a video in Windows using this video flip program. If you’re a Mac user, just adopt Wondershare Filmora X for Mac (Latest Filmora version X for Mac) to achieve the same.
First, please download Filmora X for free as per your operating system, and then follow the steps below.
1. Import Your Original Video Clips
After launching Filmora X, click “New Project” to begin. Click “Import” to browse your file folder on computer or drag the video clips directly into the media library.
When you import all of them, click the thumbnails showing in the left pane to preview in the right screen window.
Note that this video editor supports an array of video & audio formats, such as MOV, MP4, AVI, WMV, DV, avchd (MTS, M2TS). And still image files like JPG, BMP, JPEG, PNG. TIFF are all fully compatible.
And then drag your video files from media library to the video Timeline.
Learn the complete list of supported files formats of Filmora X.
2. Flip the Whole Video
Then double click the video in the timeline to access the editing panel. In the window that appears, switch to Video tab and you will find Transform option located on the top.
Click on the Transform to expand the four options including Rotate, Flip, Scale and Position. To get the effect you need, you can adjust the Rotate and Flip settings and check the real-time effect in the previewing window. Though only four buttons available, you can create more options by using them together.
- Rotate: rotate video at any angle by entering the angle value or moving the Rotate slide: rotate 90° clockwise & anti-clockwise, rotate at 180°, rotate 270°, and more
- Flip: Flip video horizontally, i.e. flip video left to right; flip video vertically that is fliping video upside down
- You can combine Rotate and Flip feature to flip video vertically and rotate 90°clockwise or flip video vertically and rotate 90°counterclockwise.
Besides, you can also change the video position and the video scale. This is the step of flips the whole part of the video.
3. Flip Only a Part of the Video
Sometimes, you may just need to flip parts of your video file, e.g. only 1 minute instead of the whole video. In this case, you need to split your video into separate files , and then repeat step 2 to flip them individually.
To do it, just move the playhead to the position you want to split, and click the “Scissors” icon in the menu bar.
Learn more about how to split videos
4 Export Flipped Video
When you’re satisfied with the result, click “Export” in the middle right to save the flipped video. In the pop-up output window that appears, select your wanted format or configured preset for your portable player directly to watch on the go.
You may also want to upload your creation to YouTube or burn to DVD disc for better preservation, just go for it. Finally, click Export to let this video flip program perform the rest.
With the latest Filmora X video editor, you can do more than just flipping video files. For example, you can apply special effects, add background music, create picture-in-picture effect, and more. Try it now!
Check Best Program to Flip Video
Conclusion
If you are someone that can’t be bothered to learn a new video editor or someone that doesn’t want to fuss around and just want to get things done, Filmora is designed for you. Known for its lowest learning curve and low price, Filmora can help you to get the job done easily. Try it out with the buttons below to see if it matches your appetite.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
It’s very common that you filmed some amazing portrait or landscape videos but in the wrong direction. This is an error made by many people because not everyone will always think about orientation when filming. Is there an easy way to flip/rotate videos so that you can watch them without turning your head sideways?
What you need is just an ease to use video editor like Wondershare Filmora to flip/rotate your video clips easily and quickly. This application offers a remarkably easy way to flip videos clockwise or anticlockwise, horizontal or vertical. What’s more, this flip software also offers a broad range of video editing features, effects and intro/credits.
In the following, I’ll describe how to flip a video in Windows using this video flip program. If you’re a Mac user, just adopt Wondershare Filmora X for Mac (Latest Filmora version X for Mac) to achieve the same.
First, please download Filmora X for free as per your operating system, and then follow the steps below.
1. Import Your Original Video Clips
After launching Filmora X, click “New Project” to begin. Click “Import” to browse your file folder on computer or drag the video clips directly into the media library.
When you import all of them, click the thumbnails showing in the left pane to preview in the right screen window.
Note that this video editor supports an array of video & audio formats, such as MOV, MP4, AVI, WMV, DV, avchd (MTS, M2TS). And still image files like JPG, BMP, JPEG, PNG. TIFF are all fully compatible.
And then drag your video files from media library to the video Timeline.
Learn the complete list of supported files formats of Filmora X.
2. Flip the Whole Video
Then double click the video in the timeline to access the editing panel. In the window that appears, switch to Video tab and you will find Transform option located on the top.
Click on the Transform to expand the four options including Rotate, Flip, Scale and Position. To get the effect you need, you can adjust the Rotate and Flip settings and check the real-time effect in the previewing window. Though only four buttons available, you can create more options by using them together.
- Rotate: rotate video at any angle by entering the angle value or moving the Rotate slide: rotate 90° clockwise & anti-clockwise, rotate at 180°, rotate 270°, and more
- Flip: Flip video horizontally, i.e. flip video left to right; flip video vertically that is fliping video upside down
- You can combine Rotate and Flip feature to flip video vertically and rotate 90°clockwise or flip video vertically and rotate 90°counterclockwise.
Besides, you can also change the video position and the video scale. This is the step of flips the whole part of the video.
3. Flip Only a Part of the Video
Sometimes, you may just need to flip parts of your video file, e.g. only 1 minute instead of the whole video. In this case, you need to split your video into separate files , and then repeat step 2 to flip them individually.
To do it, just move the playhead to the position you want to split, and click the “Scissors” icon in the menu bar.
Learn more about how to split videos
4 Export Flipped Video
When you’re satisfied with the result, click “Export” in the middle right to save the flipped video. In the pop-up output window that appears, select your wanted format or configured preset for your portable player directly to watch on the go.
You may also want to upload your creation to YouTube or burn to DVD disc for better preservation, just go for it. Finally, click Export to let this video flip program perform the rest.
With the latest Filmora X video editor, you can do more than just flipping video files. For example, you can apply special effects, add background music, create picture-in-picture effect, and more. Try it now!
Check Best Program to Flip Video
Conclusion
If you are someone that can’t be bothered to learn a new video editor or someone that doesn’t want to fuss around and just want to get things done, Filmora is designed for you. Known for its lowest learning curve and low price, Filmora can help you to get the job done easily. Try it out with the buttons below to see if it matches your appetite.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
It’s very common that you filmed some amazing portrait or landscape videos but in the wrong direction. This is an error made by many people because not everyone will always think about orientation when filming. Is there an easy way to flip/rotate videos so that you can watch them without turning your head sideways?
What you need is just an ease to use video editor like Wondershare Filmora to flip/rotate your video clips easily and quickly. This application offers a remarkably easy way to flip videos clockwise or anticlockwise, horizontal or vertical. What’s more, this flip software also offers a broad range of video editing features, effects and intro/credits.
In the following, I’ll describe how to flip a video in Windows using this video flip program. If you’re a Mac user, just adopt Wondershare Filmora X for Mac (Latest Filmora version X for Mac) to achieve the same.
First, please download Filmora X for free as per your operating system, and then follow the steps below.
1. Import Your Original Video Clips
After launching Filmora X, click “New Project” to begin. Click “Import” to browse your file folder on computer or drag the video clips directly into the media library.
When you import all of them, click the thumbnails showing in the left pane to preview in the right screen window.
Note that this video editor supports an array of video & audio formats, such as MOV, MP4, AVI, WMV, DV, avchd (MTS, M2TS). And still image files like JPG, BMP, JPEG, PNG. TIFF are all fully compatible.
And then drag your video files from media library to the video Timeline.
Learn the complete list of supported files formats of Filmora X.
2. Flip the Whole Video
Then double click the video in the timeline to access the editing panel. In the window that appears, switch to Video tab and you will find Transform option located on the top.
Click on the Transform to expand the four options including Rotate, Flip, Scale and Position. To get the effect you need, you can adjust the Rotate and Flip settings and check the real-time effect in the previewing window. Though only four buttons available, you can create more options by using them together.
- Rotate: rotate video at any angle by entering the angle value or moving the Rotate slide: rotate 90° clockwise & anti-clockwise, rotate at 180°, rotate 270°, and more
- Flip: Flip video horizontally, i.e. flip video left to right; flip video vertically that is fliping video upside down
- You can combine Rotate and Flip feature to flip video vertically and rotate 90°clockwise or flip video vertically and rotate 90°counterclockwise.
Besides, you can also change the video position and the video scale. This is the step of flips the whole part of the video.
3. Flip Only a Part of the Video
Sometimes, you may just need to flip parts of your video file, e.g. only 1 minute instead of the whole video. In this case, you need to split your video into separate files , and then repeat step 2 to flip them individually.
To do it, just move the playhead to the position you want to split, and click the “Scissors” icon in the menu bar.
Learn more about how to split videos
4 Export Flipped Video
When you’re satisfied with the result, click “Export” in the middle right to save the flipped video. In the pop-up output window that appears, select your wanted format or configured preset for your portable player directly to watch on the go.
You may also want to upload your creation to YouTube or burn to DVD disc for better preservation, just go for it. Finally, click Export to let this video flip program perform the rest.
With the latest Filmora X video editor, you can do more than just flipping video files. For example, you can apply special effects, add background music, create picture-in-picture effect, and more. Try it now!
Check Best Program to Flip Video
Conclusion
If you are someone that can’t be bothered to learn a new video editor or someone that doesn’t want to fuss around and just want to get things done, Filmora is designed for you. Known for its lowest learning curve and low price, Filmora can help you to get the job done easily. Try it out with the buttons below to see if it matches your appetite.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Create Stunning Slow-Mo Videos with Kapwing: A Beginner’s Guide
Change Video Speed Easily
Wondershare Filmora is one of the most popular video editing software among YouTubers , you can use it to speed up and slow down videos with Speed Ramping or Uniform Speed tools.
Kapwing is a web-based video editor that enables you to perform post-production actions on the clips that you upload. In addition, the web app has a timeline at the bottom of the interface that uses the layer-oriented approach to give you an industry-standard ambiance while editing.
With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:
- Adding text and titles to the videos
- Reversing the playback
- Inserting royalty-free video clips and images from its built-in media library
- Recording computer screen
- Recording webcam footage
- Adding audio, etc.
With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.
In this article
01 How to Make a Slow Motion Video on Kapwing? [Step by Step]
02 FAQs About Kapwing Online Video Editor
02 Use Kapwing Alternative to Make Slow Motion Video
Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]
Note: Before proceeding further, it is imperative to understand that Kapwing adds a watermark to the videos while exporting as long as you are not signed in. This limitation can be removed by signing in using your Google or Facebook ID, or with a different email address provided by some other service provider.
To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:
Step 1: Sign In and Upload the Source Video to Kapwing
Launch your favorite browser (Google Chrome is used here), go to https://www.kapwing.com/ , and click Sign In from the top-right corner of the web page. Next, use your preferred platform, i.e., Google or Facebook, or use a different email address to sign in. On the next page, click Create New Project.
When the main interface opens up, click Click to upload from the right section, and select and upload the source video that you want to slow down. Alternatively, you can either paste the URL of a published video in the available field, or upload one from your Google Drive or Google Photos storage by clicking their corresponding icons below the Click to upload button.
Step 2: Slow Down the Playback Speed
Ensure that the uploaded video is successfully added to the Timeline at the bottom, click to select the clip if not already selected, confirm that the EDIT tab is selected from the top of the right pane, and use the – and + buttons under the SPEED section to decrease and increase the playback speed of the footage respectively.
To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.
Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.
Step 3: Add Additional Decorations (Optional)
Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.
Step 4: Export and Download the Video
Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.
On the next page, click Download from the right to download the slow-motion video to your local hard drive. Alternatively, you can also click the down icon that is present next to the Export Video button, and choose your preferred format from the menu to export the video.
Note: Kapwing makes the produced videos available for public viewing while using a free account. This privacy vulnerability can be removed by subscribing to a paid plan offered by the web tool. And for free account, your video is limited to 250MB uploading, and 30 minutes long exporting.
There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.
Part 2: FAQs About Kapwing Online Video Editor
1. Is Kapwing really free?
Yes, it is free, and there will be no watermark on videos under 5 minutes. However, upon exporting, the videos remain available for the public which could be a breach of privacy for some users. This limitation can be removed by subscribing to the web tool’s paid membership. You can choose either a $192 per year or $24 per month plan for the subscription.
2. What is the limitation of using the Kapwing free plan?
When you use Kapwing with the free plan:
- All the videos that you produce remain available for the public viewing;
- The video files that you upload cannot exceed 250MB in size;
- Export 3 hours of video per month, and each video is limited to 30 minutes long;
- The resolution of the videos is restricted to 720p only, etc.
3. How slow can I make it with Kapwing?
You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.
Conclusion
Kapwing is an efficient online video editor. The best part is, the tool doesn’t add a watermark to the videos even if you are using its free plan. However, certain restrictions like file size limit, resolution threshold, etc. are imposed on you if you are a non-paid user. To get rid of all such barriers, you must subscribe to a monthly or annual plan that is $24 or $192 respectively.
Kapwing is a web-based video editor that enables you to perform post-production actions on the clips that you upload. In addition, the web app has a timeline at the bottom of the interface that uses the layer-oriented approach to give you an industry-standard ambiance while editing.
With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:
- Adding text and titles to the videos
- Reversing the playback
- Inserting royalty-free video clips and images from its built-in media library
- Recording computer screen
- Recording webcam footage
- Adding audio, etc.
With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.
In this article
01 How to Make a Slow Motion Video on Kapwing? [Step by Step]
02 FAQs About Kapwing Online Video Editor
02 Use Kapwing Alternative to Make Slow Motion Video
Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]
Note: Before proceeding further, it is imperative to understand that Kapwing adds a watermark to the videos while exporting as long as you are not signed in. This limitation can be removed by signing in using your Google or Facebook ID, or with a different email address provided by some other service provider.
To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:
Step 1: Sign In and Upload the Source Video to Kapwing
Launch your favorite browser (Google Chrome is used here), go to https://www.kapwing.com/ , and click Sign In from the top-right corner of the web page. Next, use your preferred platform, i.e., Google or Facebook, or use a different email address to sign in. On the next page, click Create New Project.
When the main interface opens up, click Click to upload from the right section, and select and upload the source video that you want to slow down. Alternatively, you can either paste the URL of a published video in the available field, or upload one from your Google Drive or Google Photos storage by clicking their corresponding icons below the Click to upload button.
Step 2: Slow Down the Playback Speed
Ensure that the uploaded video is successfully added to the Timeline at the bottom, click to select the clip if not already selected, confirm that the EDIT tab is selected from the top of the right pane, and use the – and + buttons under the SPEED section to decrease and increase the playback speed of the footage respectively.
To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.
Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.
Step 3: Add Additional Decorations (Optional)
Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.
Step 4: Export and Download the Video
Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.
On the next page, click Download from the right to download the slow-motion video to your local hard drive. Alternatively, you can also click the down icon that is present next to the Export Video button, and choose your preferred format from the menu to export the video.
Note: Kapwing makes the produced videos available for public viewing while using a free account. This privacy vulnerability can be removed by subscribing to a paid plan offered by the web tool. And for free account, your video is limited to 250MB uploading, and 30 minutes long exporting.
There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.
Part 2: FAQs About Kapwing Online Video Editor
1. Is Kapwing really free?
Yes, it is free, and there will be no watermark on videos under 5 minutes. However, upon exporting, the videos remain available for the public which could be a breach of privacy for some users. This limitation can be removed by subscribing to the web tool’s paid membership. You can choose either a $192 per year or $24 per month plan for the subscription.
2. What is the limitation of using the Kapwing free plan?
When you use Kapwing with the free plan:
- All the videos that you produce remain available for the public viewing;
- The video files that you upload cannot exceed 250MB in size;
- Export 3 hours of video per month, and each video is limited to 30 minutes long;
- The resolution of the videos is restricted to 720p only, etc.
3. How slow can I make it with Kapwing?
You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.
Conclusion
Kapwing is an efficient online video editor. The best part is, the tool doesn’t add a watermark to the videos even if you are using its free plan. However, certain restrictions like file size limit, resolution threshold, etc. are imposed on you if you are a non-paid user. To get rid of all such barriers, you must subscribe to a monthly or annual plan that is $24 or $192 respectively.
Kapwing is a web-based video editor that enables you to perform post-production actions on the clips that you upload. In addition, the web app has a timeline at the bottom of the interface that uses the layer-oriented approach to give you an industry-standard ambiance while editing.
With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:
- Adding text and titles to the videos
- Reversing the playback
- Inserting royalty-free video clips and images from its built-in media library
- Recording computer screen
- Recording webcam footage
- Adding audio, etc.
With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.
In this article
01 How to Make a Slow Motion Video on Kapwing? [Step by Step]
02 FAQs About Kapwing Online Video Editor
02 Use Kapwing Alternative to Make Slow Motion Video
Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]
Note: Before proceeding further, it is imperative to understand that Kapwing adds a watermark to the videos while exporting as long as you are not signed in. This limitation can be removed by signing in using your Google or Facebook ID, or with a different email address provided by some other service provider.
To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:
Step 1: Sign In and Upload the Source Video to Kapwing
Launch your favorite browser (Google Chrome is used here), go to https://www.kapwing.com/ , and click Sign In from the top-right corner of the web page. Next, use your preferred platform, i.e., Google or Facebook, or use a different email address to sign in. On the next page, click Create New Project.
When the main interface opens up, click Click to upload from the right section, and select and upload the source video that you want to slow down. Alternatively, you can either paste the URL of a published video in the available field, or upload one from your Google Drive or Google Photos storage by clicking their corresponding icons below the Click to upload button.
Step 2: Slow Down the Playback Speed
Ensure that the uploaded video is successfully added to the Timeline at the bottom, click to select the clip if not already selected, confirm that the EDIT tab is selected from the top of the right pane, and use the – and + buttons under the SPEED section to decrease and increase the playback speed of the footage respectively.
To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.
Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.
Step 3: Add Additional Decorations (Optional)
Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.
Step 4: Export and Download the Video
Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.
On the next page, click Download from the right to download the slow-motion video to your local hard drive. Alternatively, you can also click the down icon that is present next to the Export Video button, and choose your preferred format from the menu to export the video.
Note: Kapwing makes the produced videos available for public viewing while using a free account. This privacy vulnerability can be removed by subscribing to a paid plan offered by the web tool. And for free account, your video is limited to 250MB uploading, and 30 minutes long exporting.
There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.
Part 2: FAQs About Kapwing Online Video Editor
1. Is Kapwing really free?
Yes, it is free, and there will be no watermark on videos under 5 minutes. However, upon exporting, the videos remain available for the public which could be a breach of privacy for some users. This limitation can be removed by subscribing to the web tool’s paid membership. You can choose either a $192 per year or $24 per month plan for the subscription.
2. What is the limitation of using the Kapwing free plan?
When you use Kapwing with the free plan:
- All the videos that you produce remain available for the public viewing;
- The video files that you upload cannot exceed 250MB in size;
- Export 3 hours of video per month, and each video is limited to 30 minutes long;
- The resolution of the videos is restricted to 720p only, etc.
3. How slow can I make it with Kapwing?
You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.
Conclusion
Kapwing is an efficient online video editor. The best part is, the tool doesn’t add a watermark to the videos even if you are using its free plan. However, certain restrictions like file size limit, resolution threshold, etc. are imposed on you if you are a non-paid user. To get rid of all such barriers, you must subscribe to a monthly or annual plan that is $24 or $192 respectively.
Kapwing is a web-based video editor that enables you to perform post-production actions on the clips that you upload. In addition, the web app has a timeline at the bottom of the interface that uses the layer-oriented approach to give you an industry-standard ambiance while editing.
With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:
- Adding text and titles to the videos
- Reversing the playback
- Inserting royalty-free video clips and images from its built-in media library
- Recording computer screen
- Recording webcam footage
- Adding audio, etc.
With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.
In this article
01 How to Make a Slow Motion Video on Kapwing? [Step by Step]
02 FAQs About Kapwing Online Video Editor
02 Use Kapwing Alternative to Make Slow Motion Video
Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]
Note: Before proceeding further, it is imperative to understand that Kapwing adds a watermark to the videos while exporting as long as you are not signed in. This limitation can be removed by signing in using your Google or Facebook ID, or with a different email address provided by some other service provider.
To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:
Step 1: Sign In and Upload the Source Video to Kapwing
Launch your favorite browser (Google Chrome is used here), go to https://www.kapwing.com/ , and click Sign In from the top-right corner of the web page. Next, use your preferred platform, i.e., Google or Facebook, or use a different email address to sign in. On the next page, click Create New Project.
When the main interface opens up, click Click to upload from the right section, and select and upload the source video that you want to slow down. Alternatively, you can either paste the URL of a published video in the available field, or upload one from your Google Drive or Google Photos storage by clicking their corresponding icons below the Click to upload button.
Step 2: Slow Down the Playback Speed
Ensure that the uploaded video is successfully added to the Timeline at the bottom, click to select the clip if not already selected, confirm that the EDIT tab is selected from the top of the right pane, and use the – and + buttons under the SPEED section to decrease and increase the playback speed of the footage respectively.
To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.
Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.
Step 3: Add Additional Decorations (Optional)
Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.
Step 4: Export and Download the Video
Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.
On the next page, click Download from the right to download the slow-motion video to your local hard drive. Alternatively, you can also click the down icon that is present next to the Export Video button, and choose your preferred format from the menu to export the video.
Note: Kapwing makes the produced videos available for public viewing while using a free account. This privacy vulnerability can be removed by subscribing to a paid plan offered by the web tool. And for free account, your video is limited to 250MB uploading, and 30 minutes long exporting.
There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.
Part 2: FAQs About Kapwing Online Video Editor
1. Is Kapwing really free?
Yes, it is free, and there will be no watermark on videos under 5 minutes. However, upon exporting, the videos remain available for the public which could be a breach of privacy for some users. This limitation can be removed by subscribing to the web tool’s paid membership. You can choose either a $192 per year or $24 per month plan for the subscription.
2. What is the limitation of using the Kapwing free plan?
When you use Kapwing with the free plan:
- All the videos that you produce remain available for the public viewing;
- The video files that you upload cannot exceed 250MB in size;
- Export 3 hours of video per month, and each video is limited to 30 minutes long;
- The resolution of the videos is restricted to 720p only, etc.
3. How slow can I make it with Kapwing?
You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.
Conclusion
Kapwing is an efficient online video editor. The best part is, the tool doesn’t add a watermark to the videos even if you are using its free plan. However, certain restrictions like file size limit, resolution threshold, etc. are imposed on you if you are a non-paid user. To get rid of all such barriers, you must subscribe to a monthly or annual plan that is $24 or $192 respectively.
Seamless Transitions: Mastering Color Matching in PowerDirector
How to Color Match Different Video Clips in PowerDirector?
Liza Brown
Oct 26, 2023• Proven solutions
“How good is CyberLink PowerDirector when it comes to automatic color matching?”
CyberLink is one of the best video editors with features including motion tracking, screen recording, Multicam editing, etc. It further consists of tools such as titles, transitions, and effects to use quickly. However, we need to talk here about the PowerDirector color match process and assess its easiness. No matter how good a video editor is, the process must be simple to understand for the primary users. So, let’s begin with the step-by-step guide on how to color match different video clips in PowerDirector.
The Color Match feature of CyberLink PowerDirector allows matching tones and colors on selected video clips.
Part 1: How to Color Match Different Video Clips in PowerDirector?
Applying color match/color correction to different clips at the same time also speeds up your workflow.
Step 1: Download ColorDirector
The first step to effectively do color matching in CyberLink PowerDirector is to download the ColorDirector. It contains a real camera and color effects to achieve cinematic color match editing.
Step 2: Apply Presets to multiple clips on singletrack
We assume that you already have clips imported into the timeline. Thus, do a left-click on the first clip, select Fix/Enhance tab, and then choose ColorDirector in the preview window.
Step 3: Make manual adjustments
Yes, you are required to make manual adjustments by clicking the Manual and Adjustments tab in the preview window.
You can now make some adjustments to RGB Channel, as here we have made it a little darker.
After you’re over with the manual adjustment, click Back to go back to the PowerDirector. Now, you can see that an adjustment is made to the selected clip.
Then, you need to click Apply to All and see the effect getting added to all the clips on the same track.
Step 4: Apply color match adjustments at different tracks
Again, apply the same process by left-clicking the video clip on a different track. Select Fix/Enhance and then go to Color Director.
Now, make some adjustments to the RBG Channel as we have made it a little brighter here. Then, you need to save this adjustment as Preset to apply to multiple clips simultaneously on different tracks. Hit the Create > Preset tab as shown in the image below.
Then, you can name the Preset and hit on Save tab.
After you go back to the PowerDirector, you can see your recently-saved preset in the Presets list.
Now, select multiple clips. Left-click on a clip, hold the Ctrl key, then left-click on another clip while holding the Ctrl key, and so on. You will be able to choose more than one clip in this manner.
Then, check the Color Presets/CLUTs tab and select the Preset that you have saved to apply on multiple clips simultaneously on different tracks.
So, these were the steps of PowerDirector color match manual adjustments. We have only adjusted RGB Channel, but there are many others to look for and consider.
Part 2: An Easier Solution to Automatically Matching the Color of Video Footage
Got confused by manual adjustments? There is an alternative solution if you also hate the manual process of color adjustments in CyberLink PowerDirector. Go no far than the professional yet beginner-friendly Wondershare Filmora to check in for automatic color match adjustments. Yes, you don’t have to go for separate adjustments in RGB Channel, etc., as you have done before.
The Wondershare Filmora is also one of the most considerable video editors in the professional industry. It comes with pretty intuitive advanced editing tools such as Video Stabilization, Color Tuning, Color Matching, Green Screen, Key Framing, and Motion Tracking, etc., to name a few.
Without further ado, let’s note down the automatic color match process in Wondershare Filmora as follows.
Steps for Automatic Color Matching Different Video Clips in Wondershare Filmora
Step 1: Download Wondershare Filmora
Firstly, tap the Try It Free button to download Wondershare Filmora and proceed with the installation.
Step 2: Import media files
Then, import media files. We have imported two stock footage with different color schemes, as shown below.
Step 3: Apply Color Match
Double-click the footage over the timeline and head to the Color panel, as shown in the screenshot below. Then, select the Color Match option.
Turn on the Comparison View and move the slider given in the preview section. To match color settings, click on Match and wait a few seconds to let it see the same in both the Reference and Current preview window.
So, this is all you need to do as an alternative for the PowerDirector color match. The color match settings in Wondershare Filmora are relatively automatic and do not require additional RGB Channels adjustments.
Conclusion
After discussing the steps on the PowerDirector color match process, we’d now like to mention our final words. To find the easy, effective, and time-saving method, you should first consider the length of steps above in both sections. After the small analysis, you can check up on your favorite way of color matching.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Oct 26, 2023• Proven solutions
“How good is CyberLink PowerDirector when it comes to automatic color matching?”
CyberLink is one of the best video editors with features including motion tracking, screen recording, Multicam editing, etc. It further consists of tools such as titles, transitions, and effects to use quickly. However, we need to talk here about the PowerDirector color match process and assess its easiness. No matter how good a video editor is, the process must be simple to understand for the primary users. So, let’s begin with the step-by-step guide on how to color match different video clips in PowerDirector.
The Color Match feature of CyberLink PowerDirector allows matching tones and colors on selected video clips.
Part 1: How to Color Match Different Video Clips in PowerDirector?
Applying color match/color correction to different clips at the same time also speeds up your workflow.
Step 1: Download ColorDirector
The first step to effectively do color matching in CyberLink PowerDirector is to download the ColorDirector. It contains a real camera and color effects to achieve cinematic color match editing.
Step 2: Apply Presets to multiple clips on singletrack
We assume that you already have clips imported into the timeline. Thus, do a left-click on the first clip, select Fix/Enhance tab, and then choose ColorDirector in the preview window.
Step 3: Make manual adjustments
Yes, you are required to make manual adjustments by clicking the Manual and Adjustments tab in the preview window.
You can now make some adjustments to RGB Channel, as here we have made it a little darker.
After you’re over with the manual adjustment, click Back to go back to the PowerDirector. Now, you can see that an adjustment is made to the selected clip.
Then, you need to click Apply to All and see the effect getting added to all the clips on the same track.
Step 4: Apply color match adjustments at different tracks
Again, apply the same process by left-clicking the video clip on a different track. Select Fix/Enhance and then go to Color Director.
Now, make some adjustments to the RBG Channel as we have made it a little brighter here. Then, you need to save this adjustment as Preset to apply to multiple clips simultaneously on different tracks. Hit the Create > Preset tab as shown in the image below.
Then, you can name the Preset and hit on Save tab.
After you go back to the PowerDirector, you can see your recently-saved preset in the Presets list.
Now, select multiple clips. Left-click on a clip, hold the Ctrl key, then left-click on another clip while holding the Ctrl key, and so on. You will be able to choose more than one clip in this manner.
Then, check the Color Presets/CLUTs tab and select the Preset that you have saved to apply on multiple clips simultaneously on different tracks.
So, these were the steps of PowerDirector color match manual adjustments. We have only adjusted RGB Channel, but there are many others to look for and consider.
Part 2: An Easier Solution to Automatically Matching the Color of Video Footage
Got confused by manual adjustments? There is an alternative solution if you also hate the manual process of color adjustments in CyberLink PowerDirector. Go no far than the professional yet beginner-friendly Wondershare Filmora to check in for automatic color match adjustments. Yes, you don’t have to go for separate adjustments in RGB Channel, etc., as you have done before.
The Wondershare Filmora is also one of the most considerable video editors in the professional industry. It comes with pretty intuitive advanced editing tools such as Video Stabilization, Color Tuning, Color Matching, Green Screen, Key Framing, and Motion Tracking, etc., to name a few.
Without further ado, let’s note down the automatic color match process in Wondershare Filmora as follows.
Steps for Automatic Color Matching Different Video Clips in Wondershare Filmora
Step 1: Download Wondershare Filmora
Firstly, tap the Try It Free button to download Wondershare Filmora and proceed with the installation.
Step 2: Import media files
Then, import media files. We have imported two stock footage with different color schemes, as shown below.
Step 3: Apply Color Match
Double-click the footage over the timeline and head to the Color panel, as shown in the screenshot below. Then, select the Color Match option.
Turn on the Comparison View and move the slider given in the preview section. To match color settings, click on Match and wait a few seconds to let it see the same in both the Reference and Current preview window.
So, this is all you need to do as an alternative for the PowerDirector color match. The color match settings in Wondershare Filmora are relatively automatic and do not require additional RGB Channels adjustments.
Conclusion
After discussing the steps on the PowerDirector color match process, we’d now like to mention our final words. To find the easy, effective, and time-saving method, you should first consider the length of steps above in both sections. After the small analysis, you can check up on your favorite way of color matching.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Oct 26, 2023• Proven solutions
“How good is CyberLink PowerDirector when it comes to automatic color matching?”
CyberLink is one of the best video editors with features including motion tracking, screen recording, Multicam editing, etc. It further consists of tools such as titles, transitions, and effects to use quickly. However, we need to talk here about the PowerDirector color match process and assess its easiness. No matter how good a video editor is, the process must be simple to understand for the primary users. So, let’s begin with the step-by-step guide on how to color match different video clips in PowerDirector.
The Color Match feature of CyberLink PowerDirector allows matching tones and colors on selected video clips.
Part 1: How to Color Match Different Video Clips in PowerDirector?
Applying color match/color correction to different clips at the same time also speeds up your workflow.
Step 1: Download ColorDirector
The first step to effectively do color matching in CyberLink PowerDirector is to download the ColorDirector. It contains a real camera and color effects to achieve cinematic color match editing.
Step 2: Apply Presets to multiple clips on singletrack
We assume that you already have clips imported into the timeline. Thus, do a left-click on the first clip, select Fix/Enhance tab, and then choose ColorDirector in the preview window.
Step 3: Make manual adjustments
Yes, you are required to make manual adjustments by clicking the Manual and Adjustments tab in the preview window.
You can now make some adjustments to RGB Channel, as here we have made it a little darker.
After you’re over with the manual adjustment, click Back to go back to the PowerDirector. Now, you can see that an adjustment is made to the selected clip.
Then, you need to click Apply to All and see the effect getting added to all the clips on the same track.
Step 4: Apply color match adjustments at different tracks
Again, apply the same process by left-clicking the video clip on a different track. Select Fix/Enhance and then go to Color Director.
Now, make some adjustments to the RBG Channel as we have made it a little brighter here. Then, you need to save this adjustment as Preset to apply to multiple clips simultaneously on different tracks. Hit the Create > Preset tab as shown in the image below.
Then, you can name the Preset and hit on Save tab.
After you go back to the PowerDirector, you can see your recently-saved preset in the Presets list.
Now, select multiple clips. Left-click on a clip, hold the Ctrl key, then left-click on another clip while holding the Ctrl key, and so on. You will be able to choose more than one clip in this manner.
Then, check the Color Presets/CLUTs tab and select the Preset that you have saved to apply on multiple clips simultaneously on different tracks.
So, these were the steps of PowerDirector color match manual adjustments. We have only adjusted RGB Channel, but there are many others to look for and consider.
Part 2: An Easier Solution to Automatically Matching the Color of Video Footage
Got confused by manual adjustments? There is an alternative solution if you also hate the manual process of color adjustments in CyberLink PowerDirector. Go no far than the professional yet beginner-friendly Wondershare Filmora to check in for automatic color match adjustments. Yes, you don’t have to go for separate adjustments in RGB Channel, etc., as you have done before.
The Wondershare Filmora is also one of the most considerable video editors in the professional industry. It comes with pretty intuitive advanced editing tools such as Video Stabilization, Color Tuning, Color Matching, Green Screen, Key Framing, and Motion Tracking, etc., to name a few.
Without further ado, let’s note down the automatic color match process in Wondershare Filmora as follows.
Steps for Automatic Color Matching Different Video Clips in Wondershare Filmora
Step 1: Download Wondershare Filmora
Firstly, tap the Try It Free button to download Wondershare Filmora and proceed with the installation.
Step 2: Import media files
Then, import media files. We have imported two stock footage with different color schemes, as shown below.
Step 3: Apply Color Match
Double-click the footage over the timeline and head to the Color panel, as shown in the screenshot below. Then, select the Color Match option.
Turn on the Comparison View and move the slider given in the preview section. To match color settings, click on Match and wait a few seconds to let it see the same in both the Reference and Current preview window.
So, this is all you need to do as an alternative for the PowerDirector color match. The color match settings in Wondershare Filmora are relatively automatic and do not require additional RGB Channels adjustments.
Conclusion
After discussing the steps on the PowerDirector color match process, we’d now like to mention our final words. To find the easy, effective, and time-saving method, you should first consider the length of steps above in both sections. After the small analysis, you can check up on your favorite way of color matching.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Oct 26, 2023• Proven solutions
“How good is CyberLink PowerDirector when it comes to automatic color matching?”
CyberLink is one of the best video editors with features including motion tracking, screen recording, Multicam editing, etc. It further consists of tools such as titles, transitions, and effects to use quickly. However, we need to talk here about the PowerDirector color match process and assess its easiness. No matter how good a video editor is, the process must be simple to understand for the primary users. So, let’s begin with the step-by-step guide on how to color match different video clips in PowerDirector.
The Color Match feature of CyberLink PowerDirector allows matching tones and colors on selected video clips.
Part 1: How to Color Match Different Video Clips in PowerDirector?
Applying color match/color correction to different clips at the same time also speeds up your workflow.
Step 1: Download ColorDirector
The first step to effectively do color matching in CyberLink PowerDirector is to download the ColorDirector. It contains a real camera and color effects to achieve cinematic color match editing.
Step 2: Apply Presets to multiple clips on singletrack
We assume that you already have clips imported into the timeline. Thus, do a left-click on the first clip, select Fix/Enhance tab, and then choose ColorDirector in the preview window.
Step 3: Make manual adjustments
Yes, you are required to make manual adjustments by clicking the Manual and Adjustments tab in the preview window.
You can now make some adjustments to RGB Channel, as here we have made it a little darker.
After you’re over with the manual adjustment, click Back to go back to the PowerDirector. Now, you can see that an adjustment is made to the selected clip.
Then, you need to click Apply to All and see the effect getting added to all the clips on the same track.
Step 4: Apply color match adjustments at different tracks
Again, apply the same process by left-clicking the video clip on a different track. Select Fix/Enhance and then go to Color Director.
Now, make some adjustments to the RBG Channel as we have made it a little brighter here. Then, you need to save this adjustment as Preset to apply to multiple clips simultaneously on different tracks. Hit the Create > Preset tab as shown in the image below.
Then, you can name the Preset and hit on Save tab.
After you go back to the PowerDirector, you can see your recently-saved preset in the Presets list.
Now, select multiple clips. Left-click on a clip, hold the Ctrl key, then left-click on another clip while holding the Ctrl key, and so on. You will be able to choose more than one clip in this manner.
Then, check the Color Presets/CLUTs tab and select the Preset that you have saved to apply on multiple clips simultaneously on different tracks.
So, these were the steps of PowerDirector color match manual adjustments. We have only adjusted RGB Channel, but there are many others to look for and consider.
Part 2: An Easier Solution to Automatically Matching the Color of Video Footage
Got confused by manual adjustments? There is an alternative solution if you also hate the manual process of color adjustments in CyberLink PowerDirector. Go no far than the professional yet beginner-friendly Wondershare Filmora to check in for automatic color match adjustments. Yes, you don’t have to go for separate adjustments in RGB Channel, etc., as you have done before.
The Wondershare Filmora is also one of the most considerable video editors in the professional industry. It comes with pretty intuitive advanced editing tools such as Video Stabilization, Color Tuning, Color Matching, Green Screen, Key Framing, and Motion Tracking, etc., to name a few.
Without further ado, let’s note down the automatic color match process in Wondershare Filmora as follows.
Steps for Automatic Color Matching Different Video Clips in Wondershare Filmora
Step 1: Download Wondershare Filmora
Firstly, tap the Try It Free button to download Wondershare Filmora and proceed with the installation.
Step 2: Import media files
Then, import media files. We have imported two stock footage with different color schemes, as shown below.
Step 3: Apply Color Match
Double-click the footage over the timeline and head to the Color panel, as shown in the screenshot below. Then, select the Color Match option.
Turn on the Comparison View and move the slider given in the preview section. To match color settings, click on Match and wait a few seconds to let it see the same in both the Reference and Current preview window.
So, this is all you need to do as an alternative for the PowerDirector color match. The color match settings in Wondershare Filmora are relatively automatic and do not require additional RGB Channels adjustments.
Conclusion
After discussing the steps on the PowerDirector color match process, we’d now like to mention our final words. To find the easy, effective, and time-saving method, you should first consider the length of steps above in both sections. After the small analysis, you can check up on your favorite way of color matching.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Also read:
- 2024 Approved Video Compression Made Easy Top 5 Free iPhone and iPad Apps
- New Elevate Your Sound The 10 Most Powerful Audio Editing Software for 2024
- New Calculate with Ease The Best Aspect Ratio Tools Online for 2024
- New 2024 Approved Free Video Trimming Software No Watermarks Allowed
- New Reduce WebM File Size Top Online Compressors for 2024
- In 2024, Unlock Vertical Video Potential Top Editing Apps for Mobile
- New 2024 Approved Bring Your Ideas to Life Best Video Animation Apps for Mobile Devices
- Updated Top MP4 Metadata Editors for PC and Mac for 2024
- Updated VN Video Editor Pro Apk We Put Its Editing Capabilities to the Test for 2024
- New In 2024, The Complete Handbook to Facebook Video Aspect Ratios Size Up Your Game
- Updated In 2024, Get Noticed Top 10 Online Tools for Gaming Intro Creation
- New In 2024, Luminous Video Editing Top Picks
- Updated 2024 Approved Get the Best Audio Conversion Results 6 Expert-Recommended Tools
- Updated In 2024, The Kids Movie Maker Handbook Tips, Tricks, and Fun
- Updated Vertical Video Editing in the Cloud Best Web-Based Options
- New In 2024, Slow and Steady Wins the Race How to Use VLCs Slow Motion Feature
- Updated 2024 Approved The Animators Toolkit 8 Essential Software for Mac and Windows
- New 2024 Approved Unlock Waxs Potential A Beginners Guide to Video Editing
- Updated Color Harmony in PowerDirector Tips and Tricks for a Polished Look for 2024
- Updated 2024 Approved Free MOV Video Concatenation 5 Best Tools to Get the Job Done
- New In 2024, Maximize Your Reach Optimizing Social Media Images with the Right Aspect Ratios
- New Take Your Video Editing to the Next Level with These Adobe Premiere Shortcuts for 2024
- New 2024 Approved Elevate Your Videos Top-Rated iPad Video Editors
- Updated Video Editors Toolkit The Best Software Revealed for 2024
- New 2024 Approved Unstable Footage? Fix It with These Top 5 Free Android Video Stabilizer Apps
- New Watermark-Free Video Editing 8 Free Trimming Solutions for 2024
- Updated In 2024, Aspect Ratio Options on Prime Video
- New The Ultimate FCPX Freebie List 10 Plugins to Elevate Your Workflow for 2024
- Updated 2024 Approved VLC Video Playback Hacks How to Play in Slow Motion on Any Device
- New The Ultimate 4K Showcase Must-See Video Clips for Any Enthusiast for 2024
- VHS on the Go Best Mobile Apps for Vintage Video Lovers for 2024
- New S Most Popular Video Brightening Software for 2024
- Updated In 2024, The Ultimate OS X Mavericks Video Editors Handbook
- New 2024 Approved Top Chromebook Video Editing Apps for Android Users
- Updated 2024 Approved 5 Essential MTS Video Editing Software for Creators
- New Wav Converter Mastery Tips, Tricks, and Techniques for 2024
- Updated Looking for a Legitimate Tool to Create Videos From Your Photos and Add a Background Music? Here Are All the Best Photo Music Video Makers for All Users for 2024
- New Effortless WebM to MP3 Conversion Top 10 Converter Reviews for 2024
- New In 2024, Image Proportion Perfection A Detailed Tutorial on Calculating Ratios
- New The Ultimate Free Video Blur Hack Online Solution for 2024
- In 2024, Nikon Video Editing Essentials Software, Workflow, and Best Practices
- New 2024 Approved Top-Rated Free iMovie Alternatives for Video Editing
- Organize Your Videos with Ease Top 8 Mac Metadata Editors for 2024
- Updated Take Your Videos to the Next Level 10 Best Premiere Pro Transitions for 2024
- Updated Transcribe Audio Recordings with Ease Top Techniques for 2024
- Updated 2024 Approved The Ultimate Guide to Choosing an MP3 Converter for Mac
- Tecno Spark 10C Music Recovery - Recover Deleted Music from Tecno Spark 10C
- Repair Corrupt PDF v1.7 File using PDF Repair Tool | Stellar
- How to Unlock iPhone 12 mini with/without SIM Card
- 9 Solutions to Fix Process System Isnt Responding Error on Vivo Y36i | Dr.fone
- Ultimate Guide on Vivo Y27 5G FRP Bypass
- 4 Things You Must Know About iPhone 7 Activation Lock
- 3 Ways to Erase Apple iPhone 12 When Its Locked Within Seconds
- Top 10 Fixes for Phone Keep Disconnecting from Wi-Fi On Vivo Y100i Power 5G | Dr.fone
- In 2024, How to Mirror Infinix Note 30 Pro to Mac? | Dr.fone
- From AVI to MKV How to Stream Any Video Format to Your Chromecast for 2024
- In 2024, Full Guide to Unlock Apple iPhone SE with iTunes
- In 2024, How to Unlock Disabled iPhone 13 Pro Max/iPad Without Computer
- In 2024, How To Unlock Stolen iPhone 7 Plus In Different Conditionsin | Dr.fone
- In 2024, Top 10 AirPlay Apps in Poco X5 Pro for Streaming | Dr.fone
- Full Guide to Hard Reset Your Samsung Galaxy S21 FE 5G (2023) | Dr.fone
- How to Perform Hard Reset on Samsung Galaxy F15 5G? | Dr.fone
- Change Location on Yik Yak For your Vivo T2 Pro 5G to Enjoy More Fun | Dr.fone
- In 2024, How to Unlock Apple iPhone 11 Pro With an Apple Watch & What to Do if It Doesnt Work | Dr.fone
- A Detailed VPNa Fake GPS Location Free Review On Lava Blaze 2 Pro | Dr.fone
- Updated Knowing All Ways To Slow Down Video With Adobe Premiere Pro
- How to Transfer Photos From Tecno Pova 5 to Samsung Galaxy S21 Ultra | Dr.fone
- How to Rescue Lost Videos from Motorola Edge+ (2023)
- 5 Ways to Track Vivo Y100i without App | Dr.fone
- Looking For A Location Changer On Apple iPhone 8 Plus? Look No Further | Dr.fone
- Users Guide How To Create Photo Talking Videos With the Best Tools, In 2024
- The Ultimate Guide to Samsung Galaxy S24 Ultra Pattern Lock Screen Everything You Need to Know
- 3 Ways for Android Pokemon Go Spoofing On Motorola Moto G84 5G | Dr.fone
- Updated 2024 Approved Animated Photos Made Easy Top Picks
- In 2024, The Best iSpoofer Alternative to Try On Apple iPhone 14 Plus | Dr.fone
- In 2024, Still Using Pattern Locks with Poco C50? Tips, Tricks and Helpful Advice
- In 2024, How to Bypass FRP from Sony Xperia 1 V?
- Title: Use Auto-Sync of Final Cut Pro to Deal with Out of Sync Problem in You Video. This Article Shows You How and More for 2024
- Author: Isabella
- Created at : 2024-05-19 13:03:39
- Updated at : 2024-05-20 13:03:39
- Link: https://video-creation-software.techidaily.com/use-auto-sync-of-final-cut-pro-to-deal-with-out-of-sync-problem-in-you-video-this-article-shows-you-how-and-more-for-2024/
- License: This work is licensed under CC BY-NC-SA 4.0.